582379
8
Zoom out
Zoom in
Previous page
1/12
Next page
POWX242 EN
Copyright © 2015 VARO p a g e | 8 www.varo.com
Warning! Do not attempt to pick up an off-cut or to remove the holding workpiece before the
cutting blade has completely stopped. If holding the workpiece by hand take extreme care and
ensure hand is kept away from the cutting blade.
10.2 90° Cutting (Fig. 7/8)
Loosen the star grip screw (27),
Set the angle stop (5) to 90° and retighten the star grip screw (27).
Retighten the screws (28) to fasten the angle stop (5).
Move the machine head (29) to the far end with the handle (9).
Position the tile against the rail fence (6) on the angle stop (5).
Switch on the tile cutting machine.
Caution: Always wait until the cooling water has reached the cutting wheel (2) first.
Move the machine head (29) slowly and smoothly forward through the tile with the handle
(9).
Switch off the tile cutting machine after completion of cutting.
10.3 45° Diagonal cut (Fig. 9)
Set the angle stop (5) to 45°.
Cut as described in 7,3,
10.4 45° Length wise cut, "jolly cut" (Fig.10}
Loosen the star grip screw (10).
Tilt the guide rail (7) to the left to 45° on the angle scale (17).
Retighten the star grip screw (10).
Cut as described in 10.2.
10.5 Changing cutting blade (fig 11/12)
Warning! To avoid injury from accidental starting, always turn the switch off
“0” and remove the power plug from the power source before changing the
blade.
Unscrew the four screws (30) and remove the safety hood (8) for the blade.
Place the wrench (31) on the motor shaft and hold.
Using the wrench (34), loosen the flange nut in the direction of rotation of the cutting wheel
(2). (Caution: Left-hand screw-thread.)
Remove the outer flange (35) and cutting wheel (2).
Clean the mounting flange thoroughly before fitting the new cutting wheel.
Fit the new cutting wheel by following the above procedures in reverse and then tighten.
Caution: Pay attention to the direction of rotation of the cutting wheel!
Mount the safety hood (8) lor the blade again.
DIAMOND BLADES
Only use 180mm diameter Continuous Rim Wet Diamond blades.
DO NOT use larger, segmented or 'turbo' blades, , wood sawing blades, or any other cutting
device.
Severe bodily injury, and damage to your saw can occur.
Inspect blades daily for cracks or uneven wear. Discard cracked, chipped or bent blades!
Ensure the blade is mounted with the rotation arrow in the proper direction and is securely
tightened with a wrench.
Always ensure a continuous flow of water on both sides of the blade before cutting any
material.
Do not operate the machine without all safety guards in position
Do not force the material into the blade. Let the blade cut at its own speed.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX242 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX242

Powerplus POWX242 User Manual - German - 13 pages

Powerplus POWX242 User Manual - Dutch - 13 pages

Powerplus POWX242 User Manual - French - 13 pages

Powerplus POWX242 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info