675037
10
Zoom out
Zoom in
Previous page
1/13
Next page
POWX221 EN
Copyright © 2017 VARO P a g e | 10 www.varo.com
8.2 Lengthwise sawing with a(vertical) mitre
This method is practically the same, except that the saw blade is placed at the angle required.
With this type of method the fence may only be along the righthand side of
the sawblade.
8.3 Lengthwise sawing of narrow workpieces.
Assume that this process is extremely dangerous.
Take all the necessary safety measures and continually push the workpiece through (until
behind the saw blade) using a synthetic aid instead of by hand.
8.4 Crosswise sawing
Remove the fence and apply the cross-cut fence in the righthand carriage.
Adjust the height of the saw blade (see lengthwise sawing).
Press the workpiece against the cross-cut fence and keep at least 2,5 cm distance from
the front of the saw blade.
Switch on the engine and wait until the maximum number of revolutions has been
reached.
Press the workpiece against the fence and the bench. Carefully push the wood through
the saw blade. Continue until behind the saw blade. Then switch off the engine and keep
this position until the saw blade has stopped completely before you remove the wood.
Never pull the wood back. If necessary, switch the engine off and keep the position until
the saw blade has stopped completely.
8.5 Crosswise sawing with a vertical mitre
This method is practically the same, except that the saw blade is placed in the angle required.
Only place the cross-cut fence on the righthand side of the saw blade.
Never saw too small pieces of wood. Never use your hands to carry out
difficult operations.
8.6 Crosswise sawing with a horizontal mitr
With this method the cross-cut fence must be secured at the angle required. Keep the
workpiece pressed firmly against the cross-cut fence and the bench before you start cutting off.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX221 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX221

Powerplus POWX221 User Manual - German - 15 pages

Powerplus POWX221 User Manual - Dutch - 14 pages

Powerplus POWX221 User Manual - French - 14 pages

Powerplus POWX221 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info