675037
9
Zoom out
Zoom in
Previous page
1/13
Next page
POWX221 EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
Now use the 2 keys: one for the flange and one for the nut and now clamp it.
Now put the inlay back in the bench and fasten it.
7.8 Mounting the push stick holders
Mount both push stick holders on the side of the machine using the bolts and rings supplied.
7.9 Use of the mitring set-up Fig. A
By turning the handle at the side of the machine you can adjust the saw blade to a maximum
of 45° (4).
8 OPERATION
There are two types of sawing methods:
Lengthwise sawing : Sawing the workpiece in the length of the wood grain.
Cross-cutting or cutting off : Sawing off the workpiece crosswise.
If it concerns a panel, we do not usually distinguish between the wood grain, but we name the
method where we saw off a part of the width of the panel (lengthwise sawing) and when we
cut off the length (cross-cutting or cutting-off).
For both sawing methods one of the fences must be used. Therefor never
saw without a fence!
Attention! Before you start sawing, first check the following:
1. Is the saw blade secured?
2. Are all the locking handles secured?
3. Is the fence parallel to the saw blade?
4. Is the protective cap working properly?
5. Are you wearing safety goggles?
6. Is the saw blade not rubbing against anything?
It is absolutely necessary to take these points into consideration before you
start work!
8.1 Lengthwise sawing
Secure the fence to the correct measuring position and remove the cut-off guide from the
bench carriage.
Turn the saw blade approximately 2 mm higher than the total thickness of the wood to be
sawn.
Press the wood lightly towards the bench and let it glide against the cut-off fence.
Remain at least 3 cm. from the front of the saw blade before you switch on
the engine. The side of the wood which is against the fence must be
completely straight. Keep your hands at least 10 cm away from the saw
track to be followed.
Switch on the engine and wait until the saw blade has reached the maximum number of
revolutions before you start sawing.
While you press the wood against the bench and the fence, you can carefully push the
wood through the saw blade without forcing it.
Never pull the workpiece backwards. If necessary, switch off the engine first without
altering the position of the workpiece.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX221 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX221

Powerplus POWX221 User Manual - German - 15 pages

Powerplus POWX221 User Manual - Dutch - 14 pages

Powerplus POWX221 User Manual - French - 14 pages

Powerplus POWX221 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info