582667
10
Zoom out
Zoom in
Previous page
1/14
Next page
POWX1365MB EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
Conventional tools such as keyhole saws or knives generally give excellent results, though
the plunge saw can be used if a particularly neat, dust free cut is required or if there is a
danger of cutting pipes or cables.
13 MITRE BASE
13.1 Cutting angle adjustment
NOTE: The angle scale (25) shows mitre angles from 0° to 60° to the left,
and 0°to 60° to the right.
There are four degree scales is 0°, 15°, 30°and 45°on the angle scale
(26) which these locations represent the most common angles for cutting
operation.
Take out clamp (20), lift the lock lever for mitre scale (21) and loose extension rod (23).
If the desired angle is one of the most common angles for cutting, set the right edge of
extension rod (23) align scale mark to the required degree measurement on the angle
scale (26).
Note: The pointer of the display scale window (27) indicates the above
required degree measurement on the angle scale (25) at the same time.
(Refer to Fig. 7)
If the desired angle is not one of the most common angles for cutting, set the pointer (28)
of the display scale window (27) align scale mark to the required degree measurement on
the angle scale (25).
Tighten the lock lever (21) and make sure the extension rod (23) fixes firmly.
13.2 Installing and adjusting the clamp
Place the clamp subassembly (20) on the mounting column clamp(29) of work platform
with angle scale (22).
NOTE: There are no screws to secure clamp. The clamp subassembly will
secure itself to the work platform (22) when turning the knob to clamp the
work-piece.
Do not use your other hand to hold the clamp when tightening. Only turn
the knob to secure clamp to work platform.
NOTE: prior to estimate thickness of work-piece, adjust the height of clamp
to higher than work-piece which convenient for clamping work-piece
quickly.
13.3 Adjusting position of work platform with angle scale (22)
There is a lock knob on (30) the bottom of work platform (22) which adjusts position of work
platform at the workbench. Loose the work platform (22) by turning lock knob anticlockwise
and slide the work platform to desired position as similar to Fig. 8 shows. Finally tighten the
lock knob firmly.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1365MB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1365MB in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1365MB

Powerplus POWX1365MB User Manual - German - 15 pages

Powerplus POWX1365MB User Manual - Dutch - 15 pages

Powerplus POWX1365MB User Manual - French - 15 pages

Powerplus POWX1365MB Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info