582667
7
Zoom out
Zoom in
Previous page
1/14
Next page
POWX1365MB EN
Copyright © 2015 VARO P a g e | 7 www.varo.com
9 OPERATION
9.1 Holding and switching ON/OFF
WARNING: Before engage the ON/OFF switch, check that the saw blade is
properly fitted and runs smoothly, and that the blade clamp screw (8) is well
tightened.
Connect the plug to the power supply. The LED power-on indicator (14) is illumed until the tool
is disconnect from the power mains.
9.1.1 Switching on the tool:
Push the lock-off button (6) forward with the forefinger (refer to the direction of arrow on Fig.
5) , depress ON/OFF switch trigger (5) firmly inwards and keep it pressed at the same time
(refer to the direction of arrow on Fig. 5).
When you release the trigger, the main switch returns automatically to initial position and the
tool turns off.
Warning: The saw blade continues to rotate after the tool is switched off.
9.1.2 Releasing the plunge stop
Press the rear position of safety lock button (3) downwards and keep it pressed (refer to the
direction of arrow on Fig. 5).
NOTE: Pressing the safety lock button (3) unlocks the plunge cut
mechanism at the same time, so that the motor can be moved downwards.
The saw blade emerges from the tiltable protective cover (12).
9.2 Setting the guide fence
Release the lock screw for guide fence (11) on the base plate (18) and set the guide fence (g)
in the guide fence slot (10). Set a desired width and retighten the lock screw for the guide
fence (11).
9.3 Laser line generator
Warnings: Do not stare directly at the laser beam, do not deliberately aim
the beam at personnel and ensure that it is not directed towards the eye of
a person for longer than 0.25s.
When you make the line of the cut on the work piece, the laser line
generator can help you get better alignment.
The laser generator switch (2) locates at the front of safety lock button for mechanical plunge
stop (3).
Turn on: Press the laser generator switch (2) to “I” position, the laser generator (1) works.
Turn off: Press the switch (2) to “O” position again.
Make sure line of the cut is on the work piece.
Adjust the depth of cut as required.
Plug in the machine and start the motor.
When the blade is at its maximum speed (approximately 5 seconds), place the saw on the
work-piece.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1365MB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1365MB in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1365MB

Powerplus POWX1365MB User Manual - German - 15 pages

Powerplus POWX1365MB User Manual - Dutch - 15 pages

Powerplus POWX1365MB User Manual - French - 15 pages

Powerplus POWX1365MB Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info