582667
6
Zoom out
Zoom in
Previous page
1/14
Next page
POWX1365MB EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
6.5 Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
7 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS
Keep hands away from cutting area and blade. Keep your second hand on auxiliary
handle or motor housing.
Do not reach underneath the workpiece.
Adjust the cutting depth to the thickness of the workpiece.
Never hold piece being cut in your hands or across your leg. Secure the workpiece to a
stable platform.
Hold power tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord.
When ripping always use a rip fence or straight edge guide.
Always use blades with correct size and shape (diamond versus round) of arbor holes.
Never use damaged or incorrect blade washers or bolt.
Don’t use any abrasive wheels with this machine!
Avoid overheating the blade tips during use!
This tool should always be used with the dust hose connected and attached to a suitable
vacuum cleaner/dust extractor.
8 ASSEMBLY
8.1 Setting the cutting depth (Fig .1)
NOTE: If possible we recommend that the cutting depth is set
approximately 2 mm deeper than the material thickness. This should help to
ensure you achieve a clean cut.
Unclamp the lock lever of the cutting depth setting clamp (7), set the required cutting depth on
the scale (4) and re-clamp the lock lever.
8.2 Changing a saw blade
WARNING: Incorrect positioning of the blade can permanently damage the
tool.
Ensure the tool is unplugged from the mains supply.
Press and hold the spindle lock button (16) on, release the clamping screw with plain
washer (8) by using the inner hexagon wrench (f) (turn clockwise to open). Remove the
clamping screw with plain washer (see Fig. 2, 3 and 4).
Set the cutting depth to the maximum. (See Setting the Cutting Depth section)
Lift up the base plate (18).
Remove the saw blade.
The installation of a saw blade is done in the reverse order.
Press the spindle lock button (16) (until it engages) and tighten the clamping screw (8)
firmly.
NOTE: The arrow on the saw blade must agree with the arrow showing the
direction of rotation (running direction shown on the device).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1365MB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1365MB in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1365MB

Powerplus POWX1365MB User Manual - German - 15 pages

Powerplus POWX1365MB User Manual - Dutch - 15 pages

Powerplus POWX1365MB User Manual - French - 15 pages

Powerplus POWX1365MB Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info