645723
8
Zoom out
Zoom in
Previous page
1/12
Next page
POWX1340 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
7.3.6 Cutting disc
Use: Cutting or slitting bolts, screws , sheet
metal, thin wood and plastic.
7.3.7 Orbital sander
Use: Sanding , smoothing and shaping wood
and fiberglass.
8 CHAINSAW SHARPENING ATTACHMENT KIT (FIG. B)
8.1 Assembly of chainsaw sharpening attachment
Depending on your particular chain saw, make sure your assemble your new sharpener
properly as follows:
Refer to the drawing below for the correct grinding stone.
When you have determined the correct grinding stone for your chain from the drawing,
assemble the attachment by screwing the guide (B) and appropriate number of spaces (C)
to the clamp (D) using the two screws (A), as shown in the figure 1.
i. If using the 5,5mm (pink) grinding stone, assemble both
spacers between the guide and the clamp.
ii. If using the 4,8mm (orange) grinding stone, assemble both
spacers between the guide and the clamp.
iii. If using the 4,0mm (bleu) grinding stone, no spacers are
needed.
iv. If using the 4,5mm (white) grinding stone, assemble 1 spacer
between the guide and the clamps.
Securely mount the correct grinding stone in your tool with approximately 6,35mm of the
shank exposed between the chuck cap and the stone (figure 2).
Remove the housing cap and screw on the chainsaw sharpening attachment (Figure .3)
Using the appropriate side of the gauge €, adjust the guide so it is properly positioned with
respect to the grinding stone and tighten the screws. The gauge must be flush with the
corner(G) of the guide while making contact with the grinding stone (figure 4).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1340 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1340

Powerplus POWX1340 User Manual - German - 14 pages

Powerplus POWX1340 User Manual - Dutch - 13 pages

Powerplus POWX1340 User Manual - French - 13 pages

Powerplus POWX1340 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info