645723
6
Zoom out
Zoom in
Previous page
1/12
Next page
POWX1340 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away
from the surface to be cut.
Always wear safety goggles and hearing protection. If desired or required also use another
kind of protection like for example an apron or helmet.
Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s
instructions.
Ensure that blotters are used when they are provided with the bonded abrasive product
and when they are required.
If a guard is supplied with the tool never use the tool without such a guard.
For tools intended to be fitted with threaded hole wheel, ensure that the thread in the
wheel is long enough to accept the spindle length.
Ensure that ventilation openings are kept clear when working in dusty conditions. If it
should become nessesary to clear dust, first disconnect the tool from the mains supply
(use non metallic objects) and avoid damaging internal parts.
Though poor conditions of the electrical mains, shortly voltage drops can appear when
starting the equipment. This can influence other equipment (eq. blinking of a lamp). If the
mains-impedance Zmax <0.348 Ohm, such disturbances are not expected. (In case of
need, you may contact your local supply authority for further information.
6.1 Additional safety instructions
Do not use the tool on light metal with a magnesium content exceeding
80%, as this type of metal is flammable.
The work head may continue rotating after the tool is turned off.
On the upper side of the tool there is a spindle-lock button. Do not press
the spindle-lock button while the tool is running.
Make sure that the accessories used are suitable for the maximum speed stated in the
technical data.
Make sure that the accessories are mounted according to the instructions.
Only use accessories and adapters supplied by the manufacturer.
Make sure that sparks cannot hit any persons or set flammable materials alight.
Always wear safety goggles, hearing protection and if necessary other protective means,
such as working gloves, hard hat, etc.
7 ASSEMBLY
Before mounting an accessory, always unplug the tool.
7.1 Changing the attachment tools (Pic 1)
The small accessory attachments such as the grinding stones or cutting discs may be
attached directly to the multi tool.
If required , these tools may also be attach to the flexible drive shaft.
7.2 Attaching small tools directly to the multi tool. (Pic 2)
- Turn the collet chuck grip slightly while holding down the locking button
until the button engages.
Never press down on the locking button while the tool is running.
If the collet chuck grip can not be loosened by hand, use the small spanner.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1340 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1340

Powerplus POWX1340 User Manual - German - 14 pages

Powerplus POWX1340 User Manual - Dutch - 13 pages

Powerplus POWX1340 User Manual - French - 13 pages

Powerplus POWX1340 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info