645068
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWX1186 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
8.3 Additional handle (fig; 4)
For safety reasons you must only use the demolition hammer with the
additional handle.
The additional handle (1) enables you to achieve better stability while using the demolition
hammer.
The additional handle can be turned into any required position. To do so, undo the lock
knob (8) of auxiliary handle. Then turn the handle into the most comfortable working
position and tighten the lock knob (8) again.
Important. To avoid danger, the machine must only be held using the
two handles (2-3). Otherwise you may suffer an electric shock if you
chisel into cables.
9 LUBRICATION - OIL LEVEL
Check the oil level before using the machine.
Place the machine on the floor with the tool chuck (5), pointing downwards.
The oil must be at least 3 mm above the bottom of the inspection window (6).
The oil should be changed after around 40-50 hours of use.
Recommended oil: 25ml SAE 15W/40 or an alternative of the same quality.
9.1 Oil change (Fig. 5)
Switch off the machine and disconnect the plug from the socket.
Undo the hexagonal head screw with the inspection window (6) using the wrench (7) and
drain the oil.
To prevent the oil from running out in an uncontrolled manner, hold a small metal chute
under the opening and collect the oil in a vessel until it has fully drained out of the
machine.
Important: The waste oil must be disposed of in the appropriate
collection point for waste oil.
Add new oil (approx. 25 ml) through the oil filler opening until the oil level reaches the
required level. Tighten the hexagonal screw again.
Re-check the oil level after a short period of operation.
10 MAINTENANCE
Check every day the tightening of screws and nuts. Except the procedures described in this
manual, this tool needs no specific maintenance. The repair of the tool's inner components is
of the competence of specialists. The cleaning of plastic parts is done with a soft damp cloth
and a bit of mild soap. Never submerge the tool and do not use detergents, alcohol, spirit,
etc...For an in-depth cleaning, please consult the after-sales department.
WARNING: For maintenance and cleaning, always remove the plug from
the electric power supply. Never use water or other liquids to clean
electric parts.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1186 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1186

Powerplus POWX1186 User Manual - German - 12 pages

Powerplus POWX1186 User Manual - Dutch - 11 pages

Powerplus POWX1186 User Manual - French - 12 pages

Powerplus POWX1186 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info