645068
6
Zoom out
Zoom in
Previous page
1/11
Next page
POWX1186 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
Keep the work area clean. Cluttered areas and benches invite injuries.
Consider work area environment. Do not expose power tools to rain and do not use power
tools in damp or wet locations. Keep the work area well lit. Do not use power tools where
there is a risk to cause fire or explosion.
Guard against electric shock. Avoid body contact where possible with earthed or grounded
surfaces (e.g. pipes, radiators, ranges, refrigerators).
Keep children away. Do not let visitors touch the tool or extension cord. All visitors should
be kept away from work area.
Store Idle tools. When not in use, tools should be stored in a dry, high or locked place, out
of reach of children.
Do not force the tool. It will do the job better and more safely at the rate for which it was
intended.
Use the right tool. Do not force small tools or attachments to do the job of a heavy duty
tool. Do not use tools for purposes not intended, for example, do not use circular saw to
cut tree limbs or logs.
Dress properly. Do not wear loose clothing or jewellery as they can be caught in moving
parts. Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use safety glasses. Use a face or dust mask as well if the operation is dusty or if using in
enclosed spaces.
Do not abuse the cord. Never carry the tool by its cord or yank it to disconnect it from the
socket. Keep the cord away from heat, oil and sharp edges.
Secure your work. Use clamps or a vice to hold your work. It is safer than using your hand
and it frees both hands to operate tool.
Do not overreach. Keep proper footing and balance at all times.
Maintain tools with care. Keep cutting tools sharp an clean for better and safer
performance. Follow instructions for lubricating and changing accesssories. Inspect tool
cords periodically and if damaged have repaired by an authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep handles dry, clean and free
from oil and grease.
Disconnect tools. Disconnect when not in use, before servicing and when changing
accessories such as blades, bits and cutters.
Remove adjusting keys and wrenches. From the habit of checking to see that keys and
adjusting wrenches are removed from the tool and replaced in the storage area before
switching on.
Avoid unintentional starling. Do not carry a plugged-in tool with a finger on the switch.
Ensure the switch if off when plugging in.
Use outdoor extension cords. When a tool is used outdoors, use only extension cords
intended for outdoor use and so marked.
Stay alert. Watch what you are doing. Use common sense. Do not operate tools when you
are tired.
Connect dust extactlon equipment. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are connected and properly used,
especially in confined areas.
Check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine whether it will operate properly and
perform its intended function. Check for alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual. Have
defective switches replaced by an authorized service centre. Do not use the tool if the
switch does not turn it on and off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1186 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1186

Powerplus POWX1186 User Manual - German - 12 pages

Powerplus POWX1186 User Manual - Dutch - 11 pages

Powerplus POWX1186 User Manual - French - 12 pages

Powerplus POWX1186 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info