645068
7
Zoom out
Zoom in
Previous page
1/11
Next page
POWX1186 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
Warning ! The use of any accessory or attachment, other than recommended in this
instruction manual, may present a risk of personal injury.
Have your tool repaired by a qualified person. This electrical tool is in accordance with the
relevant safety requirements. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger to the user.
7 APPLICATION
7.1 Switching On/Off (Fig. 2)
Plug the cord set into power socket.
Switching on: Press the ON/OFF switch trigger (1).
Switching off: Release ON/OFF switch trigger (1).
7.2 How to use the demolition hammer
1. After placing the tip of the tool on concrete surface, switch ON.
2. By utilizing the weight of the machine and by firmly holding the demolition hammer with
both hands, one can effectively control the subsequent recoil motion.
3. Proceed at a moderate work-rate, the use of too much force will impair efficiency.
CAUTION After long time of use, the cylinder case becomes hot.
Therefore, be careful not to burn your hands.
WARNING Don’t apply big pressure to the machine. The hammer
mechanism is activated by applying a slight pressure on the tool when
the chisel bit is in contact with the work-piece.
8 CHANGING TOOLS
Unplug the tool from the power supply, only use drill spindles compatible with the tool.
8.1 Mounting chisel
CAUTION: Be sure to switch power OFF and disconnect the plug to
avoid serious trouble.
8.1.1 Inserting the tool (Fig 3)
Clean the tool before fitting it and apply a thin coating of grease to the tool shaft.
Pull out the locking bolt (4) as far as possible, turn it through 180° and release it.
Insert the tool into the tool mounting (5) and push it in as far as possible.
Pull out the locking bolt (4) again, turn it through 180° in the opposite direction and release
it.
Check the lock by pulling the tool.
8.2 Dismantling
Proceed in reverse order to mounting
WARNING Accessories can be hot after use. Dont touch the tip of
accessory by hand! Please always use protective gloves to remove the
accessory.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1186 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1186

Powerplus POWX1186 User Manual - German - 12 pages

Powerplus POWX1186 User Manual - Dutch - 11 pages

Powerplus POWX1186 User Manual - French - 12 pages

Powerplus POWX1186 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info