480927
15
Zoom out
Zoom in
Previous page
1/23
Next page
POWX0782 EN
Copyright © 2015 VARO P a g e | 15 www.varo.com
Replace the push block when damaged.
10.2.5 Installation
HAZARD!
Before starting with the installation of the machine:
- Switch the machine “OFF”
- Remove the plug from the socket
- Wait until at the machine has come to a complete standstill
Leave the saw head in a raised position.
Set the mitre saw in the 0° position and tighten up the locking screw.
You must position the lower saw blade guard correctly and you must make sure that
switch B (29) is activated.
Lower the saw head and lock it in position.
Remove the mitre and width guide (4) from the saw blade guard.
HAZARD!
Before starting to work, check that the following items are in a proper condition.
- Riving knife
- Safety saw blade guard
- Saw blade guard
- Push block
Wear protective clothing and apply the necessary protective measures:
- Dust exhauster
- Ear protection
- Safety goggles
Stand in the correct position for operating the machine
- At the front of the saw
- In front of the saw
- At the left side of the sawing line
- If two persons are working at the same time, then the other person must stand at a sufficient
distance from the saw.
Use following accessories, if required by the type of work you are doing:
- Workpiece support for long workpieces, which would otherwise fall off the table at the end of
the sawing process.
- Dust collector
Always hold the workpiece against the saw blade and do not block it.
Do not try to stop the turning of the saw blade, by pressing the workpiece against the side
of the saw blade. A risk of injuries can occur, if the saw blade is blocked.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0782 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0782 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0782

Powerplus POWX0782 User Manual - German - 24 pages

Powerplus POWX0782 User Manual - Dutch - 23 pages

Powerplus POWX0782 User Manual - French - 24 pages

Powerplus POWX0782 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info