675015
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWX07562 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
10 REPLACING THE SAW BLADE (FIG. 8)
Pull out the power plug.
Swing up the machine head (4).
Press release lever (2) sideways.
Move guard upwards and secure hex key in flange bolt (28)
Press the saw shaft lock with one hand while holding the wrench on the flange bolt with
the other hand.
Firmly press on the saw shaft lock (27) and slowly rotate the flange bolt (28) in clockwise
direction until it is completely removed.
Remove flange (29)
Take the blade (5) off the inner flange and pull out downwards.
Mount the new saw blade in reverse order and fasten.
Important! The cutting bevel of the teeth, i.e. the direction of rotation of the saw blade, has
to conform with the direction of the arrow marked on the housing.
Clean the saw blade flanges thoroughly before mounting the saw blade.
Reattach the movable blade guard (6) in reverse order.
Before using the saw again, check that the safety devices are in good working order.
Important: Every time that you change the saw blade, check to see that it spins freely in
the groove of the turntable in both perpendicular and 45° angle settings.
11 LASER FUNCTION (FIG. 9)
You can switch the laser ON and OFF with the switch (31).
The laser (32) directs a beam onto the work-piece.
Extremely precise cuts can be made using the laser function.
12 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
12.1 Maintenance
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Remove dust and dirt regularly from the machine. Cleaning is best done with compressed
air or a rag.
Re-lubricate all moving parts in regular intervals.
Never use caustic agents to clean plastic parts.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
13 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07562 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07562

Powerplus POWX07562 User Manual - German - 11 pages

Powerplus POWX07562 User Manual - Dutch - 11 pages

Powerplus POWX07562 User Manual - French - 11 pages

Powerplus POWX07562 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info