645078
8
Zoom out
Zoom in
Previous page
1/10
Next page
POWX0650 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
9.1 Cleaning
The machine requires very little maintenance.
Ensure that the ventilation slots are not blocked and clean the machine regularly with a
soft cloth, clean the ventilation slots using compressed air.
Mains cables and carbon brushes may only be replaced by an authorized workshop or by
a similarly qualified person.
Remove the diamond cutting discs and clean the motor flange, the flange nut and the
protective guard after finishing work.
Carefully check the diamond cutting discs for signs of damage such as broken segments
etc.
Damaged cutting discs must be replaced immediately.
In the unlikely event of a breakdown, have the machine repaired by an authorized
workshop or by a similarly qualified person. Note the article number on the machines
rating when making enquiries or ordering replacement parts.
9.2 Checking and replacing the carbon brushes
For safety reasons, the machine automatically switches off if the carbon brushes are so
worn out that they no longer have contact with the motor. In that case, the carbon brushes
must be replaced by a pair similar carbon brush available through the after-sales service
organization or qualified professional person. Loosen the carbon brush cover (7) anti-
clockwise using a screwdriver, open the cap and remove the old carbon brushes (Fig. 9).
If they are 6 mm or less then they must both be replaced. Fit new carbon brushes and
replace the carbon brush cover (7).
After placing new carbon brushes, let the machine run with no load for 15 minutes.
CAUTION: The brushes must always be replaced in pairs. Always
disconnect the machine from the power supply before removing any
electrical covers.
10 TECHNICAL SPECIFICATIONS
Power supply
Rated power
Cutting depth
Cutting width
No load speed
Protection class
Diamond cutting disc diameter
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
95 dB(A)
Acoustic power level LwA
106 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Trilling):
Max. 3.4 m/s²
K = 1.5 m/s²
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0650 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0650

Powerplus POWX0650 User Manual - German - 12 pages

Powerplus POWX0650 User Manual - Dutch - 11 pages

Powerplus POWX0650 User Manual - French - 11 pages

Powerplus POWX0650 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info