645078
5
Zoom out
Zoom in
Previous page
1/10
Next page
POWX0650 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
Always run the machine at no load for at least 30 seconds before starting work. Damaged,
out-or-round or vibrating diamond cutting discs may not be used.
Protect the diamond cutting disc from impact, shock and grease.
The machine can kick back and/or the diamond cutting disc can break if the diamond
cutting disc jams in the cut. Switch the machine off immediately if the diamond cutting
discs jams in the cut.
Hold the machine with both hands and maintain a stable posture when working with the
machine.
Always lead the cable away to the rear of the machine.
Ensure the machine is switched off before connecting the machine to the mains.
Switch the machine on and allow the machine to reach full speed before starting the
cutting.
Never touch rotating diamond cutting discs.
Observe the direction of rotation, hold the machine so that spark and/or dust fly away form
your body. Sparks can also cause hidden fires.
Exercise caution when cutting chased in supporting walls. Consult the engineer if
necessary.
Ensure there are no hidden cables, cable conduits, water pipes or gas pipes beneath the
surface of the wall you wish to cut.
Contact with live cables is potentially deadly and can lead to fire.
Damage to water pipes can lead to property damage or to electric shock.
Use cable or pipe detector to locate hidden pipes or cables or consult the engineer.
Do not cut walls clad with wood or insulation material, the high levels of heat produced by
the diamond cutting discs may lead to fire.
Use the machine only at a safe distance from any inflammable materials in the area.
Bear in mind that flying sparks produced while working can cause fires.
Warning: The diamond cutting discs continue to rotate after the machine
has been switched off, never stop the diamond cutting discs by applying
lateral pressure.
The machine may only be operated when connected to a suitable vacuum device, the
vacuum device must be fitted with a filter for masonry dust and be approved for work with
masonry dust.
A dust mask approved for masonry dust must be worn.
WARNING: Diamond cutting discs become very hot during operation.
Allow the diamond cutting discs to cool down completely before
removing or changing discs.
The machine should be disconnected from the mains immediately, should the mains cable
be damaged or cut through while working, never operate the machine with a damaged
cable. Damaged mains cables may only be replaced with genuine replacement parts
available from the manufacturer.
Never allow children to use the machine.
7 ASSEMBLY
ATTENTION! Disconnect the power plug before carrying out any
adjustments or maintenance.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0650 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0650

Powerplus POWX0650 User Manual - German - 12 pages

Powerplus POWX0650 User Manual - Dutch - 11 pages

Powerplus POWX0650 User Manual - French - 11 pages

Powerplus POWX0650 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info