582664
9
Zoom out
Zoom in
Previous page
1/14
Next page
POWX0561 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
10.5 Straight cuts (90° cut)
Loosen both rotary knobs (8) and swivel the saw to 0° position on the scale. Tighten the
rotary knobs again.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
up when using the saw without guide rail.
To switch on the saw press the switch lock (2) and the ON/OFF switch (1) and push the
motor down. Guide the saw forward to cut.
10.6 Miter cuts (up to 48°) (Fig. 6)
First loosen both rotary knobs (8) and swivel the plunge saw to the desired graduation.
Tighten the rotary knobs again.
Switch the plunge saw on.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
in up position when using the saw without guide rail.
To switch the saw on press the switch lock (2) and the ON/OFF switch (1) and push the
motor down. Guide the saw forward to cut.
The cut indicator (14) shows the cutting path for 90° and 45° miter cuts (without using the
guide rail).
10.7 Marked cutting
Turn the selector switch (17) to marked cut function.
Press the switch lock (2) and push the motor down. The casing stops in 2.5 mm cutting
depth position.
Note: The marking line should be aligned with cutting line A (0 mark).
10.8 Plunge cuts
For a straight cut first loosen both rotary knobs (8) and swivel the plunge saw to 0°
position on the scale. Tighten the rotary knobs again.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
up if not using the guide rail.
Press the switch lock (2) and the ON/OFF switch (1) and push the motor down. Guide the
saw forward to cut.
Note: To prevent the saw from kicking back during plunge cuts follow these steps:
Always place the plunge saw with the rear edge of the base plate (5) against a fixed limit
stop.
Hold the plunge saw in both hands and slowly lower the saw blade.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0561 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0561 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0561

Powerplus POWX0561 User Manual - German - 15 pages

Powerplus POWX0561 User Manual - Dutch - 15 pages

Powerplus POWX0561 User Manual - French - 15 pages

Powerplus POWX0561 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info