POWDP6050 EN
Copyright © 2020 VARO P a g e | 7 www.varo.com
8 ASSEMBLY
8.1 Fitting and removing the motor housing
▪ Note: mount the additional handle (13) first before fitting the motor housing (2) to avoid
interference between components.
▪ The motor housing has been locked to the tub with clamps.
▪ To remove the motor housing (2). First unlock the clamps (4) and then lift it from the tub
(5).
▪ To re-fit the motor housing, place it on the tub and tighten the clamps.
8.2 Mounting the wheels
▪ Remove the motor housing (2).
▪ Turn the tub (5) upside down and insert the wheels (7) in the openings.
▪ Turn the tub in its original position again.
▪ Re-fit the motor housing.
8.3 Mounting the hose
▪ Insert the hose (8) in the connection (6) and turn to lock.
8.4 Fitting the advanced filter (Fig. 3)
The advanced filter is suitable for collecting small waste material and dust.
▪ Remove the motor housing (2).
▪ Place the new advanced dust filter at the underside of the motor housing.
▪ Push to lock filter.
▪ Re-fit the motor housing.
8.5 Mounting the tube to the hose
▪ Slide the tube on the handgrip.
▪ Place the required nozzle on the tail end of the tube.
9 OPERATION
9.1 Charging the battery pack
Note: Batteries will not reach full charge the first time they are charged.
Allow several cycles for the item to fully charge. The battery should only be
charged indoors.
After normal use, about 1 hour of charging time is required for the battery to be fully charged.
The battery pack will become slightly warm while charging, this is normal and does not indicate
a problem.
Do not place the charger in an area of extreme heat or cold. Best is at normal room temperature.
When the battery becomes fully charged, unplug your charger from the power supply and
remove the battery pack from the charger.
Note:
▪ Allow the battery pack to cool completely before charging
▪ Inspect the battery pack before charging, do not charge a cracked or leaking battery pack.
9.1.1 Charging indication (Fig. 1)
Connect the charger to the power outlet socket:
▪ Solid green: ready to charge.
▪ Flickering red: charging.
▪ Solid green: charged.
▪ Solid green and red: battery or charger damaged.
