481010
6
Zoom out
Zoom in
Previous page
1/11
Next page
POW8135 EN
Copyright © 2007 VARO Vic. Van Rompuy N.V. www.varo.com Page | 6
§ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
§ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
§ Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
§ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
§ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
§ Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could lead to a hazardous situation.
6.5 Service
§ Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
§ Warning! The laser beam potentially causes severe eye damage. Never look or stare
directly into the laser beam.
§ During use, do not point the laser beam at people, directly or indirectly through reflecting
surfaces.
§ This laser complies with class 2 according to EN 60825-1:2001. The unit includes no
servicing components. Do not open the housing for any reason. If the unit is damaged, have
the damage repaired by an authorized repair agent.
8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES
§ When replacing batteries, always replace the complete set. Do not mix old batteries with
new ones.
§ Prevent removed batteries from short circuiting.
§ Do not store batteries where the temperature may rise above 50 °C, e.g. in a car which has
been parked in the sun.
§ Do not burn batteries.
§ Never attempt to open batteries.
§ In case of battery leakage, carefully remove the liquid using a cloth. Avoid skin or eye
contact. Do not swallow. In case of skin or eye contact, rinse abundantly for 10 minutes with
clean water and consult a physician.
9 ASSEMBLY
9.1 Setting up the saw (Fig. 1 / 3/12)
§ Insert the two workpiece support clips (13) in the mounts (21) provided on the side of the
tool and fasten them in place with thumb screws (22).
§ Insert the clamping device (19) into one of the two mounts (20) provided on the top of stop
rail and fasten in place with the thumb screw (33).
§ Screw the additional stability bar (32) to the back of the machine.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW8135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW8135 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW8135

Powerplus POW8135 User Manual - German - 11 pages

Powerplus POW8135 User Manual - Dutch - 11 pages

Powerplus POW8135 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info