426967
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWX093 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
7.10 Fine adjustment (Fig. 22)
When the approximate depth is set, you can make fine adjustments by means of the fine-
adjustment knob {22). To adjust, turn it in clockwise or anticlockwise direction.
7.11 Cutting in serval operations (Fig. 23)
For cutting in depth and in stages, use the length-stop turret as an aid. Using the depth scale,
set the desired depth to the lowest depth-stop position on the turret. Rotate the turret so that
the highest point is under the depth stop and execute the first cut (23). Repeat the cut with the
second-highest
setting and finally with the last setting. You can also use two positions if the desired depth is
reached in two operations..
7.12 Switching on and off (Fig. 24)
Grasp the machine securely at the handles. When it is pointing in your direction, the start-stop
button is located on the right handle (24}. Keeping the safety lock pressed, press the start-stop
button. You do not have to keep the safety lock pressed as it remains in position automatically
until you release the start-stop button again. To stop the machine, simply release the start-
stop button and the motor stops..
7.13 Adjustable speed (Fig. 25)
The speed setting is located at the front of th e h o usi ng (25). Turn the knob to increase or
decrease the speed. The smaller the cutter head, the higher the speed.The larger the cutter
head, the lower the speed. A cutter head which runs too fast causes scorching of the
workpiece and leaves burnt marks. CAUTION: Do not change the speed when the machine is
working under load.
7.14 Using the parallel guide (Fig. 26)
The parallel guide can be used for cutting parallel to the edge of the workpiece. Release the
four screws securing the parallel guide and push them in so that the guide is at the desired
distance from the cutter head. Tighten the four securing screws. Press the guide securely
against the edge of the workpiece and execute the cut.
CAUTION: Abnormal vibrations may be due to a blunt cutter head.
7.15 Cutting direction (Fig. 27)
To prevent the cutter head from jumping and to obtain a good result, carry out exterior cuts in
anticlockwise and interior cuts in clockwise direction (27).
8 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow x093 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow x093 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow x093

Powerplus pow x093 User Manual - German - 12 pages

Powerplus pow x093 User Manual - Dutch - 11 pages

Powerplus pow x093 User Manual - Dutch - 13 pages

Powerplus pow x093 User Manual - Dutch - 13 pages

Powerplus pow x093 User Manual - French - 12 pages

Powerplus pow x093 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info