Manual Powerplus pow x093 (page 7 of 11) (English)

426967

Zoom out

Zoom in

1/11

POWX093 EN

7.5 Inserting and removing the chuck and cutting heads n (Fig. 10, 11 & 12)

The cutting machine is supplied with a set of 12 mm cutting heads. There are a number of

heads for cutting various profiles in wood. One example is a decorative edge on a skirting

board. The machine is supplied with two chucks for 8 mm and 12 mm. Numerous cutting

heads are available for different profiles.

Some heads are too large and leave no space for the dust-extraction system. In this casep a

mask should be worn. CAUTION: Ensure that the machine is not connected to the power

supply. To insert the chuck, locate the spindle lock at the front of the machine. Press it down

and hold it in this position. Using the wrench provided, loosen the chuck nut by turning in an

anticlockwise direction (10). Remove the chuck and clean the spindle (11). Insert the other

chuck in the spindle and screw on the nut finger tight. To insert a cutter head, loosen the

chuck nut and insert the shaft of the cutter head (12). Ensure thai at least 20 mm or halt the

length of the cutter-head shaft is inserted into the chuck. If insertion depth is less, the cutter

head will be instable and may work loose. Press the spindle lock, hold it in position, and

tighten the chuck nut. Repeatedly check the tightness of the nut during your work.

CAUTION: Handle the cutter heads carefully. They are sharp and may cause cuts.

CAUTION: Before switching the machine on, ensure that the chuck nuts are tight

7.6 Cutter guide sleeve (Fig. 13, 14 & 15)

The cutter guide sleeve is attached to the base of the machine and ensures that the machine

can follow a certain cutting profile. Only certain sizes of cutter head can be used. The si2e is

limited by the size of the hole in the cutter guide sleeve.

The dust-extraction system can be used with this accessory. To install the guide plate, lay the

cutting machine on its side. Loosen and remove the two bolts for the dust-extraction system.

Remove the four cross-head screws attaching the plastic base to the casting (13). Note the

recess in the plastic base. Hold the guide plate with the sleeve to the outside and place it in

the recess (14). Align the holes in the plastic base with the threaded holes in the casting and

tighten the four cross-head screws (15). Re-install the dust-extraction components and secure

it with bolts and nuts.

7.7 Profile accessories (Fig. 16, 17 & 18)

The accessories can be used for work on profiled workpieces such as the head of a bed and if

you wish to repeat the outside profile further towards the inside. Take the parallel guide.

Loosen and remove the four cros>head screws attaching the plastic guides (16). Remove the

plastic guides and keep them in a safe place for further use. Locate the profile accessories

and position this casting (17). Secure it with two cross-head screws. Push the parallel guide

into the machine base. Select the right cutter head for this job. Position the workpiece carefully

and begin cutting (18).

7.8 Circle cutting accessories (Fig. 19)

Accessories for cutting

circles are also supplied. These allow you to cut perfect circles in workpieces. Attach one of

the parallel guide rods in the machine base (19). Mount the circle-cutting accessory at the

other end. You can attach this accessory to any position on the guide rod. Position the tip of

the circle-cutting accessory at the centre of your circle. Press it slightly so that the tip is firmly

in the wood. You can now cut the circle.

7.9 Setting the working depth (Fig. 20 & 21)

To set the cutting depth, release the plunger locking lever and press the cutter downwards

until the desired depth is reached. Then re-lock the lever (Locking lever for cutting machine

body). To set the cutter to a fixed depth, set the depth stop (20) and secure it with the knob

(21).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow x093 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow x093

Powerplus pow x093 User Manual - German - 12 pages

Powerplus pow x093 User Manual - Dutch - 11 pages

Powerplus pow x093 User Manual - Dutch - 13 pages

Powerplus pow x093 User Manual - French - 12 pages

Powerplus pow x093 Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus pow x093 Manual

Product: