627530
51
Zoom out
Zoom in
Previous page
1/78
Next page
Owners Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007 PowerBoss
®
CORE 50 Sweeper Scrubber
Page 49
PowerBoss
®
The Power of Clean
PITCH ADJUSTMENT (Continued)
9. Turn the steering wheel straight, unlock the brake and pull the machine
forward several feet. Set the brake and observe the flare.
10. Fine tune the pitch at the adjusting screws if required.
11. Fine tune the casters if required.
12. Retighten all four adjusting nuts and the two pivot bolts.
13. Tighten the wing nuts on the casters.
TURNING OR REPLACING THE MAIN SQUEEGEE RUBBER
The primary rubber on the main squeegee frame has four different edges that may be used:
the front and back lower edge and the front and back upper edge. When the edge in use
becomes worn to the midpoint of thickness, turn the rubber to an unused edge in the order
indicated: 1. Front Lower Edge, 2. Opposite Lower Edge, 3. Front upper Edge and 4.
Opposite Upper Edge. Removal and replacement instructions follow. This procedure can be
performed with the squeegee tool on or off the machine.
1. Remove the hand knobs from the rear of the squeegee frame.
2. Remove the metal straps, the back-up strip and the outer squeegee rubber.
3. Turn the side ends of the squeegee rubber 180°, or turn the rubber upside
down to expose an unused edge. Reposition the rubber on the pins of the
squeegee frame.
4. Reposition the back-up strip.
5. Reposition the right metal strap on the right stud.
6. Repeat with the left strap and knob.
SERVICE INSTRUCTIONS (CONTINUED)
SCRUB & WATER PICK-UP COMPONENTS
NOTE
Replace the back-up strip only if they lose their elasticity.
NOTE
Removal and replacement of the main squeegee elements is easier
if the squeegee frame is removed from the machine.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Core 50 - Sweeper Scrubber at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Core 50 - Sweeper Scrubber in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info