627530
52
Zoom out
Zoom in
Previous page
1/78
Next page
Owners Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007 PowerBoss
®
CORE 50 Sweeper Scrubber
Page 50
PowerBoss
®
The Power of Clean
MAIN SQUEEGEE TOOL REMOVAL
All machines are equipped with auto-squeegee lift. To remove the squeegee tool, proceed as
follows:
1. Engage the parking brake and chock the wheels.
2. Disconnect the squeegee suction hose from the squeegee tool.
3. Loosen the two large aluminum hand knobs on top of the squeegee retaining plate.
4. Grab tool with both hands and slide or pull back the tool away from the unit
retaining and mounting plate.
MAIN SQUEEGEE TOOL INSTALL
1. Make sure the aluminum hand knobs are loose enough for the washer below the
hand knobs to have clearance to slide up onto the retaining and mounting plate.
Approximately ¾ of an inch of threads will be showing on aluminum knob.
2. Using both hands, lift the squeegee tool up and onto the mounting plate.
3. Secure the squeegee tool assembly by tightening the aluminum hand knobs
completely.
INNER SQUEEGEE REPLACEMENT
The inner squeegee is a component of the rear squeegee. When the squeegee is down and the
rear squeegee rubber is flared, if the inner squeegee has become too worn to make proper
contact with the floor, it should be replaced.
1. Remove the main squeegee tool (see removal instructions).
2. Remove the nuts on the front of the inner squeegee frame.
3. Remove the strap and the inner squeegee rubber.
4. Install the new inner squeegee rubber.
5. Position the strap and secure with the nuts.
AUTO SQUEEGEE LIFT MECHANISM
Bearing Replacement: If any binding occurs in the lift apparatus, replace the bushings, spacers
and dry bearings located on the squeegee lift assembly as necessary.
SERVICE INSTRUCTIONS (CONTINUED)
SCRUB & WATER PICK-UP COMPONENTS
The tool will fall to the floor if unsupported. Do not drop the
tool on hands or feet.
CAUTION
NOTE
This is most easily done with an assistant, but can be done by one.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Core 50 - Sweeper Scrubber at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Core 50 - Sweeper Scrubber in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info