628495
76
Zoom out
Zoom in
Previous page
1/105
Next page
This command is a channel boolean command. See Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01MIC21
Enable microphone gain stage for
input channel 2 .
F01MIC21
F01MIC20
Disable microphone gain stage for
input channel 2 .
F01MIC20
F01MIC22
Toggle microphone gain stage for
input channel 2 .
F01MIC2x , where x is 0 or 1 depending on the
current enabled state of the microphone gain stage on
input channel 2 .
F01MIC2?
Query enabled status of
microphone gain stage for input
channel 2 .
F01MIC2x , where x is 0 or 1 depending on the
current enabled state of the microphone gain stage on
input channel 2 .
F01MIC*0
Disable microphone gain stage for
input channels 1-8.
F01MIC*00000000
F01MIC*1
Enable microphone gain stage for
input channels 1-8.
F01MIC*11111111
F01MIC*2
Toggle enabled status of
microphone gain stage for input
channels 1-8.
F01MIC*abcdefgh where a-h are each 0 or 1
depending on the current enabled state of the
microphone gain stage for the corresponding input
channel.
F01MIC*?
Query enabled status of
microphone gain stage for input
channels 1-8.
F01MIC*abcdefgh where a-h are each 0 or 1
depending on the current enabled state of the
microphone gain stage for the corresponding input
channel.
F01MIC*11110000
Enable microphone gain stages for
inputs 1-4 and disable microphone
gain stages for inputs 5-8.
F01MIC*11110000
8.91. MINI -- Enable Modem Initialization String
This command controls whether or not the modem initialization string is sent at power-up. If MINI is 0, then the
modem initialization string is not sent. If MINI is 1, then the modem initialization string is sent. The text of the
modem initialization string is set via the
MINISTR command.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it
is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there
will be a delay before an acknowledgment is returned.
Example Description Status Message
F01MINI1
Enable modem initialization string.
F01MINI1
F01MINI0
Disable modem initialization string.
F01MINI0
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info