628495
75
Zoom out
Zoom in
Previous page
1/105
Next page
before the automixer (ungated) or after the automixer (gated). This command selects the gated or ungated
microphone signal. If MGATE is set to 1 for a given crosspoint, then the signal will be gated (taken after the
automixer). If MGATE is set to 0 for a given crosspoint, then the signal will be ungated (taken before the
automixer).
This command is a matrix boolean command. See
Section 6.4 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01MGATE3,A,1
Select the gated version
of microphone input 3 to
be sent to output A.
F01MGATE3,A,1
F01MGATE3,A,0
Select the ungated
version of microphone
input 3 to be sent to
output A.
F01MGATE3,A,0
F01MGATE3,A,2
Toggle the gated status of
the crosspoint that routes
microphone input 3 to
output A.
F01MGATE3,A,x , where x is 0 or 1 depending on the
current gated status of the crosspoint.
F01MGATE3,A,?
Query the gated status of
the crosspoint that routes
microphone input 3 to
output A.
F01MGATE3,A,x , where x is 0 or 1 depending on the
current gated status of the crosspoint.
F01MGATE*,A,1
Select the gated version
of all microphone inputs
to be sent to output A.
F01MGATE*,A,11111111 -- note that there are only
eight values returned, since only the eight microphone
inputs can be gated. The other inputs do not pass
through the automixer.
F01MGATE*,A,0
Select the ungated
version of all microphone
inputs to be sent to
output A.
F01MGATE*,A,00000000 -- note that there are only
eight values returned, since only the eight microphone
inputs can be gated. The other inputs do not pass
through the automixer.
F01MGATE*,A,11110000
Select the gated version
of microphone inputs 1-4
to be sent to output A and
the ungated version of
microphone inputs 5-8 to
be sent to output A.
F01MGATE*,A,11110000
F01MGATE*,A,?
Query the gated status of
all microphone inputs
routed to output A.
F01MGATE*,A,abcdefgh, where a-h are each 0 or 1
depending on the current gated status of each
crosspoint.
8.90. MIC -- Enable Microphone Gain Stage on Inputs 1-8
This command sets or queries the enabled state of the microphone gain stages on each of the microphone inputs
. Enabling the gain stage adds an extra 33 dB of gain in the input signal path. See the description of the
GAINI
command for information on how the MIC and
GAINI commands relate to nominal input levels.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info