628495
41
Zoom out
Zoom in
Previous page
1/105
Next page
8.34. CGATE -- Query Camera Gating Status Information
This command is used to query the gating status of the microphone inputs . It is identical to the GATE command
except that any given microphone must be gated on for a specified hold time in order for it to be considered "on"
by the CGATE command. The command can be used to query the status of individual microphones, or the
wildcard character can be used to query the status of all the microphone inputs. A typical use for this command
is to control camera pointing based on microphone activity. The added hold time prevents the camera from
jumping too quickly between positions when there are short amounts of signal present.
The
CGATET specifies the hold time used for the gating decisions in this command. The CGATEEN can be used to
have gating information sent automatically instead of having to poll this command.
Example Description Status Message
F01CGATE3?
Query camera gating status of
microphone input 3 .
F01CGATE3x , , where x is 0 or 1 depending on whether
the input is gated off or gated on, respectively.
F01CGATE*?
Query camera gating status of all
microphone inputs.
F01CGATE*abcdefgh , where each letter (a, b, etc.) is
either 0 or 1 depending on whether the corresponding
microphone input is gated off or gated on, respectively.
8.35. CGATEEN -- Enable Automatic Camera Gating Messages
This command controls whether or not camera gating information messages are sent automatically. If CGATEEN
is enabled, then a CGATE*? query is performed each time the camera gating status of any microphone changes.
For example, if no microphones are currently gated on and CGATEEN is enabled, then if microphone input 3
gates on, the following status message will be automatically generated:
F01CGATE*00100000
See the
CGATE command for more information.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01CGATEEN0
Disable automatic camera gating messages.
F01CGATEEN0
F01CGATEEN1
Enable automatic camera gating messages.
F01CGATEEN1
F01CGATEEN2
Toggle enabled state of automatic camera
gating messages.
F01CGATEENx , where x is either 0 or 1
depending on whether automatic camera gating
messages are currently disabled or enabled.
F01CGATEEN?
Query enabled state of automatic camera
gating messages.
F01CGATEENx , where x is either 0 or 1
depending on whether automatic camera gating
messages are currently disabled or enabled.
8.36. CGATET -- Set Camera Gating Hold Time
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info