Manual Pioneer VSX-930 K-S (page 54 of 142) (English)

586463

Zoom out

Zoom in

1/142

Basic Setup

! Select [Complete].

XXXXXX

Note

This screen is iOS 7.1. When software other than iOS 7.1 is installed on an iPhone, iPod touch, or iPad, the opera-

tion for the iPhone, iPod touch, or iPad may change.

D: WPS connection settings

WPS is an abbreviation for “Wi-Fi Protected Setup”. This is a standard stipulated by the Wi-Fi Alliance, and con-

nection to WPS compatible equipment and security settings can be performed using simple operations.

This receiver is compatible with PBC (push button) method and PIN method.

! Check that your router is compatible with PBC. If the router is not PBC-compatible, connect using the PIN

method.

! Check that the LAN cable is not connected to this receiver.

1 Select ‘Network Type’ from the Network, Bluetooth menu.

2 Use k/l to select ‘Wireless’.

3 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

4 Press HOME MENU.

5 Select ‘Network, Bluetooth’ from the HOME MENU.

6 Select ‘Network Connection’ from the Network, Bluetooth menu.

7 Select ‘Wireless’ from the Network Connection menu.

8 Select ‘WPS’.

9 At i/j, select ‘PBC’ or ‘PIN Input’ and press ENTER.

When the router is compatible with the PBC function, select ‘PBC’.

! PBC (Push-button method) – Connection settings are automatically done by simply pressing the WPS but-

ton on wireless LAN equipment that is WPS-compatible. Follow the instructions shown on the screen of this

receiver. This setting method is available when there is a WPS button on the wireless LAN equipment which

is WPS-compatible, and is the easiest method for connection settings.

! PIN Input – Indicate the SSID list of connectable access points, and select the desired access point for con-

nection. Connection settings are performed by entering the access point to which the 8-digit PIN code shown

on the screen of this receiver is to be connected.

1 Select the connection point to which the wireless LAN is to be connected with i/j, and press ENTER.

The PIN code will be shown.

2 Check the PIN code of this receiver.

3 Enter the PIN code in the access point.

Enter in the access point whose indicated PIN code is shown within two minutes after closing the PIN

code confirmation screen. Success or failure of connection will be indicated on the screen.

The PIN code input method varies depending on wireless LAN equipment. For details, refer to the user’s

manual of the wireless LAN equipment.

E: Automatically setting wireless LAN connection

1 Select ‘Network Type’ from the Network, Bluetooth menu.

2 Use k/l to select ‘Wireless’.

3 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

4 Press HOME MENU.

5 Select ‘Network, Bluetooth’ from the HOME MENU.

6 Select ‘Network Connection’ from the Network, Bluetooth menu.

7 Select ‘Wireless’ from the Network Connection menu.

8 At i/j, select ‘Auto’ and press ENTER.

9 Select the connection point to which the wireless LAN is to be connected with i/j, and

press ENTER.

10 Enter the password or WEP KEY at i/j/k/l, and press ENTER.

! k/l – Moves the cursor.

! i/j – Selects the character to be entered.

! VIDEO P. – The cursor switches the input character part and software keyboard part every time the button is

pressed. A character is deleted by pressing the DEL on the software keyboard.

1d2.Friendly Name

Edit Name

New Name

Exit Return

Keyboad

ABCDEFGH IJKLMNOPQR

STUVWXYZ 0123456789

[\]

㹜

_` {|}~ !"#$%& '

()*+, -./:;<=>?

ADEL

䠻

11 Select the DHCP setting you want.

Set the IP address of this receiver and the proxy. For details, see A: Connecting with a LAN cable (wired LAN) on

page 52 .

F: Manually setting wireless LAN connection

1 Select ‘Network Type’ from the Network, Bluetooth menu.

2 Use k/l to select ‘Wireless’.

3 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

4 Press HOME MENU.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-930 K-S in the language / languages: English as an attachment in your email.

The manual is 20,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-930 K-S

Pioneer VSX-930 K-S User Manual - German - 146 pages

Pioneer VSX-930 K-S User Manual - Dutch - 146 pages

Pioneer VSX-930 K-S User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-930 K-S Manual

Product: