Manual Pioneer VSX-930 K-S (page 52 of 142) (English)

586463

Zoom out

Zoom in

1/142

Basic Setup

A: Connecting with a LAN cable (wired LAN)

Simply connect the LAN cable. Network settings are unnecessary.

! When wireless LAN is set once, the following procedures 1 through 3 must be executed.

! Only when connected to a network without a DHCP server function, the following network settings are neces-

sary. Check the setting value with the provider or network administrator in advance when executing the set-

tings. Also refer to the user’s manual for network equipment.

! IP Address

The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond

the following ranges, you cannot play back audio files stored on components on the network or listen to

Internet radio stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

! Subnet Mask

In case an xDSL modem or a terminal adapter is directly connected to this receiver, enter the subnet mask

provided by your ISP on paper. In most cases, enter 255.255.255.0.

! Default Gateway

In case a gateway (router) is connected to this receiver, enter the corresponding IP address.

! Primary DNS Server/Secondary DNS Server

In case there is only one DNS server address provided by your ISP on paper, enter it in the

‘Primary DNS Server’ field. In case there are more than two DNS server addresses, enter

‘Secondary DNS Server’ in the other DNS server address field.

! Proxy Hostname/Proxy Port

This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address

of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the

‘Proxy Port’ field.

1 Select ‘Network Type’ from the Network, Bluetooth menu.

2 Use k/l to select ‘Wired’.

3 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

4 Press HOME MENU.

5 Select ‘Network, Bluetooth’ from the HOME MENU.

6 Select ‘Network Connection’ from the Network, Bluetooth menu.

7 Select ‘Wired’ from the Network Connection menu.

8 Select the DHCP setting you want.

When you select ON, the network is automatically set up, and you do not need to follow Steps 9. Proceed with

Step 10.

If there is no DHCP server on the network and you select ON, this receiver will use its own Auto IP function to

determine the IP address.

! The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio sta-

tion if the IP address is set for the Auto IP function.

9 Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS Server and

Secondary DNS Server.

Press i/j to select a number and k/l to move the cursor.

10 Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting to deactivate or activate the proxy

server.

In case you select ‘OFF’, proceed with Step 13. In case you select ‘ON’, on the other hand, proceed with Step 11.

11 Enter the address of your proxy server or the domain name.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

12 Enter the port number of your proxy server.

Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.

13 Select ‘OK’ to confirm the IP Address/Proxy setup.

B: Setting this receiver with iOS equipment (iOS version 5.0 or later)

The Wi-Fi settings of your iPod/iPhone/iPad (equipment with iOS version 5.0 or later) can be applied to this

receiver.

! The iOS equipment and router must be connected through Wi-Fi.

! Check that the LAN cable is not connected to this receiver.

1 Unlock the iPod/iPhone/iPad.

Check that the Wi-Fi operation mark is shown on the screen of the iOS equipment.

2 Select ‘Network Type’ from the Network, Bluetooth menu.

3 Use k/l to select ‘Wireless’.

4 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

5 Press HOME MENU.

6 Select ‘Network, Bluetooth’ from the HOME MENU.

7 Select ‘Network Connection’ from the Network, Bluetooth menu.

8 Select ‘Wireless’ from the Network Connection menu.

9 Select ‘Wi-Fi Sharing’

10 Connect the iOS equipment to the iPod/iPhone terminal on the front panel.

11 Select ‘START’, then press ENTER.

12 Tap [Allow] on iPod/iPhone/iPad.

The Wi-Fi settings of your iPod/iPhone/iPad is applied to this receiver.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-930 K-S in the language / languages: English as an attachment in your email.

The manual is 20,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-930 K-S

Pioneer VSX-930 K-S User Manual - German - 146 pages

Pioneer VSX-930 K-S User Manual - Dutch - 146 pages

Pioneer VSX-930 K-S User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-930 K-S Manual

Product: