Manual Pioneer VSX-930 K-S (page 55 of 142) (English)

586463

Zoom out

Zoom in

1/142

Basic Setup

5 Select ‘Network, Bluetooth’ from the HOME MENU.

6 Select ‘Network Connection’ from the Network, Bluetooth menu.

7 Select ‘Wireless’ from the Network Connection menu.

8 Select [Manual] with the i/j button, and press the ENTER button.

9 Enter the SSID with the i/j/k/l button, and press the ENTER button.

! k/l – Moves the cursor.

! i/j – Selects the character to be entered.

! VIDEO P. – The cursor switches the input character part and software keyboard part every time the button is

pressed. A character is deleted by pressing the DEL on the software keyboard.

10 Select the encryption method with k/l.

! None – Does not set the encryption method.

! WEP – Set to the WEP method.

! WPA2/WPA, AES+TKIP – Set to the WPA-AES, WPA-TKIP, WPA2-AES, and WPA2-TKIP method.

11 Select ‘OK’, then press ENTER.

When WEP or WPA2/WPA, AES+TKIP is selected, the password entry screen is displayed. Enter the password,

select OK, and press ENTER.

12 Select the DHCP setting you want.

Set the IP address of this receiver and the proxy. For details, see A: Connecting with a LAN cable (wired LAN) on

page 52 .

G: Setting with Web Control

To set with this method, your computer must be compatible with wireless LAN functions.

Network settings are performed on the browser on your computer.

! Check that the LAN cable is not connected to this receiver.

1 Select ‘Network Type’ from the Network, Bluetooth menu.

2 Use k/l to select ‘Wireless’.

3 Select ‘OK’, then press ENTER.

The confirmation screen will be displayed. Select ‘YES’ and press ENTER.

The on-screen display will close, and the home menu will be disabled for about 60 seconds. After 60 seconds,

execute the following operation.

4 Press HOME MENU.

5 Select ‘Network, Bluetooth’ from the HOME MENU.

6 Select ‘Network Connection’ from the Network, Bluetooth menu.

7 Select ‘Wireless’ from the Network Connection menu.

8 Select ‘Wireless Accessory Config.’.

9 Select ‘START’, then press ENTER.

The SSID and IP address will be displayed when WAC is active.

10 Select ‘OK’, then press ENTER.

11 Select [Pioneer Setup] (this receiver) from the list of wireless LAN connections on your

computer.

[Pioneer Setup:xxxxxxxx] will be shown in the SSID field. “xxxxxxxx” represents a number unique to each

product.

! For your computer, iPhone, tablet computer, or wireless equipment, refer to the respective user’s manual.

! Because this connection is not encrypted, there is a slight security risk.

! Operation verification has been done for this setting with OS X v 10.7, Safari 5.1.

12 Start the Web browser.

Access the following URL, and start setting this receiver. The Web Control menu will be shown.

http://192.168.1.1

! If you are using Safari, see Making network settings using Safari on page 111 .

13 Click IP, Proxy Setting.

14 Setup the network settings manually and then press Apply.

SSID items are generally shown automatically, but if they are not shown follow the procedures again and redo the

settings. This receiver will restart and the settings will be applied to this receiver.

Notes

! In case Web Control is not used, the screen above can be shown by entering the IP address of this receiver to

the address field on the Web browser.

! The IP address of this receiver can be checked by pressing the STATUS button on the remote controller (page

90 ) or Network Information (page 56 ).

H: Directly connecting this receiver with a smart phone by wireless (Wireless Direct)

1 Select ‘Network Connection’ from the Network, Bluetooth menu.

2 Select ‘Wireless Direct’ from the Network Connection menu.

3 Select ‘Security Protocol’ at i/j.

4 Select the encryption method with k/l.

! None – Does not set the encryption method.

— Because this connection is not encrypted, there is a slight security risk.

— When the main power of this receiver is turned off, Wireless Direct is not started when it is turned on next

time, and will operate with the network settings before Wireless Direct is started.

! WEP – Set to the WEP method.

— Even when the main power of this receiver is turned off, Wireless Direct will continuously operate the next

time it is turned on.

5 Select ‘Frequency Band’ at i/j.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-930 K-S in the language / languages: English as an attachment in your email.

The manual is 20,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-930 K-S

Pioneer VSX-930 K-S User Manual - German - 146 pages

Pioneer VSX-930 K-S User Manual - Dutch - 146 pages

Pioneer VSX-930 K-S User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-930 K-S Manual

Product: