699669
53
Zoom out
Zoom in
Previous page
1/64
Next page
53
En
08
• No sound is output.
• Sound is not output
properly.
Is the volume set to the
minimum?
If the volume of the TV or AV amplifier is set to the minimum,
raise it.
Is the disc played back in
slow motion?
Is the disc played back in
fast forward or fast reverse?
No sound is output during slow motion play and forward and
reverse scanning.
Are the audio cables
properly connected?
• Connect the cable properly according to the connected
devices (page 16).
• Insert the cable firmly and all the way in.
• If the connection plug or terminal is dirty, wipe it clean.
Is the audio cable
damaged?
If the cable is damaged, replace it with a new one.
Is Audio Output properly
set?
Set Audio Output properly, according to the connected device
(page 40).
Are the connected
components (AV receiver or
amplifier, etc.) properly set?
Read the operating instructions for the connected
components and check the volume, input, speaker settings,
etc.
Is HDMI Audio Out
properly set?
Set HDMI Audio Out to Reencode or PCM (page 41).
Is the output video
resolution properly set?
Switch the resolution at which the video and audio are output
by pressing RESOLUTION e/r.
Is a DVI device
connected?
The sound will not be output from the HDMI OUT terminal if a
DVI device is connected. Connect the device to a DIGITAL OUT
terminal or the AUDIO OUT terminals (page 20).
• For some BDs, audio signals are only output from DIGITAL
OUT terminal or the HDMI OUT terminal.
• The sound may not be output for discs containing sound
other than audio signals or non-standard sound.
• When copy-protected discs are played, the picture or sound
may not be properly output. This is not a malfunction.
Is the HDMI Mode set
appropriately?
Set the HDMI Mode properly, according to the connected
device (page 41).
Is the DIRECT function set
to ON?
Audio output does not occur from the HDMI or DIGITAL AUDIO
OUT terminals if the DIRECT function is set to On. Turn the
DIRECT function off to output audio from the HDMI or DIGITAL
AUDIO OUT terminals (page 29).
Is the TRANSPORT
function set to ON?
If the TRANSPORT function is set to ON, audio is not output from
ANALOG AUDIO OUT
terminals. Set the TRANSPORT function to OFF
to output audio from
ANALOG AUDIO OUT
terminals (page 29).
Is a file with high transfer
rate played?
Use DVD or BD to play a file with high transfer rate, such as
WAV, FLAC or DSD on the disc.
Depending on the disc, files with high transfer rate may not be
played. In such a case, those files may be correctly played via
a USB device or network.
Left/right audio channels
are inverted or only one
side is produced.
Are the audio cables
properly connected?
Check whether the audio cables for the left and right channels
are inverted or whether the cable for one side is disconnected
(page 20).
Multi-channel sound is not
output.
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Read the operating instructions for the connected AV receiver
or amplifier and check the audio output settings of the AV
receiver or amplifier.
Is multi-channel sound
selected?
Use the menu screen or AUDIO to switch the disc’s sound to
multi-channel.
Noise can be heard when
outputting DTS Digital
Audio signals from the
DIGITAL OUT terminal.
Is the connected AV
receiver or amplifier
compatible with DTS
Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the DIGITAL OUT terminal, set
Digital Output to PCM (page 40).
192 kHz or 96 kHz digital audio
signals cannot be output from
the
DIGITAL OUT
terminal.
• Copyright-protected audio is converted to 48 kHz or less
before output.
• Set Max Sampling Frequency to 96kHz or 192kHz (page 40).
Problem Check Remedy
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer UDP-LX800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer UDP-LX800 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer UDP-LX800

Pioneer UDP-LX800 User Manual - German, Dutch - 184 pages

Pioneer UDP-LX800 User Manual - French, Italian - 184 pages

Pioneer UDP-LX800 User Manual - Swedish - 184 pages

Pioneer UDP-LX800 User Manual - Spanish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info