611819
13
Zoom out
Zoom in
Previous page
1/112
Next page
13
EN
Pairing /
Calibration
Pairing with the Cyclocomputer
6.
Tap [Search].
The search for the sensor starts.
A [Searching. Please wait.] message
appears.
7.
Check the information about
the sensor.
Information about the sensors appears
when the sensors are found.
Check the following items.
[Device Number]
Make sure that the device number
is the same as the device number
of the transmitter.
[Error Rate]
Make sure that “OK” is displayed.
The device numbers are printed on
the right junction box and on the
side of the left sensor. Refer to the
Installation Manual for details.
If the numbers that are displayed on
[Device Number] are different from
the transmitter device numbers,
specify the device numbers to pair
with the sensor.
Refer to the User’s Guide of the
Cyclocomputer SGX-CA500
regarding how to specify a device
number to pair a sensor.
If “Processing...” is displayed in the
[Error Rate] area, the information
from the sensor is not being received
correctly because transmission
conditions are bad. Make sure
that the sensor you are pairing is
activated, then bring the SGX-CA500
closer to the sensor and perform the
pairing operation again.
Pairing with the sensor may not
be possible due to the inuence
of the 2.4 GHz frequency band. If
“Processing...” is displayed even if
the SGX-CA500 is moved closer
to the sensor and paired with it, try
again someplace where there is no
interference from microwaves, radio
waves, or wireless equipment.
Pairing of the right transmitter is
completed.
Next, pair the left transmitter.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM910H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910H in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info