611819
15
Zoom out
Zoom in
Previous page
1/112
Next page
15
EN
Pairing /
Calibration
Calibrating the Sensors
This product has a correction function
for the zero point uctuation caused by
varying temperatures.
The accuracy of this function improves
by calibrating the sensor when there
is a difference in temperature of more
than 4°C.
This function cannot measure correctly
if you calibrate the sensor before it is
acclimated to the outside temperature.
The sensor requires more than 20
minutes to become acclimated.
Checking the Zero Point
1.
Position the crank arm so it is
perpendicular to the ground,
pointing downward.
2.
Tap [Pedaling Monitor R] in
the sensor list screen of the
SGX-CA500.
3.
Conrm the value in [Force
Preview].
Make sure that the [Tangential
Direction Force] and [Radial Direction
Force] values are as shown here.
Tangential Direction Force: 0 ± 3 N
Radial Direction Force: 0 ± 3 N
Calibration of the right side is
nished. Calibrate the left side in the
same way.
Calibrating in Power Meter Mode
When calibrating the sensors in power
meter mode, position the crank arm
so it is perpendicular to the ground, do
the procedure to the left and right sides
together. Refer to the User’s Manual of
the Cyclocomputer you are using for
details.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM910H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910H in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info