Manual Pioneer PDRL77 (page 50 of 64) (English, French)

17999

Zoom out

Zoom in

1/64

5 More Recording Features

5 Fonctions d’enregistrements complémentaires

En/Fr

Setting skip IDs:

1 Press SKIP ID SET during playback

(or while in play-pause mode) of the

track you want to skip.

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

• Use the $ and › buttons to skip to other tracks that

don't have skip IDs set. When you press SKIP ID SET , it

will be for the track that is currently playing.

• If there's no room left on the disc to record another skip ID,

the display will show the message SKIP FULL.

2 Press SKIP ID SET again to confirm.

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

After displaying SET, the recorder reverts to the regular

playback display.

The SKIP indicator lights in the display once a skip ID has

been set.

To cancel, press either SKIP ID CLEAR or #.

3 Set further skip IDs by repeating

steps 1 and 2.

Skipping Unwanted Tracks

After recording a CD-R disc, you may decide that one or more of the

tracks are unwanted. This may be due to a simple mistake or

because a track didn't record successfully. Although you can't erase

those tracks, you can set what are called 'skip IDs'. These tell a CD

player (though not all recognize skip IDs) not to play a particular

track, but to skip to the next one on the disc.

You can also set skip IDs on CD-RWs, although it's probably a less

useful feature since you can always erase the last track.

Once a skip ID is set, you can clear it, but be careful: you can set up

to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs

in different recording sessions will reduce this number.

SKIP ID

SET CLEAR

$›

Saut des plages inutiles

Après l’enregistrement d’un CD-R, certaines plages peuvent s’avérer

inutiles. Cela peut être dû à une simple erreur ou bien au fait

qu’une plage n’a pas été enregistrée correctement. Bien que vous

ne puissiez pas effacer ces plages, vous pouvez placer ce qu’on

appelle des “codes de saut”, qui indiquent à un lecteur CD (bien

que tous ne reconnaissent pas les codes de saut) de ne pas lire une

plage particulière, et de sauter à la suivante sur le disque.

Vous pouvez aussi poser des ID de saut sur les CD-RW, bien que ce

soit une caractéristique moins pratique parce que vous pouvez

toujours effacer la dernière plage.

Une fois un ID de saut posé, vous pouvez le effacer, mais faites

attention: vous pouvez poser jusqu'à 21 ID de saut par disque, mais

la pose et l'effacement répétées d'ID de saut dans différentes

sessions d'enregistrement réduiront ce nombre.

Pose de codes de saut

Appuyez sur SKIP ID SET pendant la

lecture (ou en mode pause de lecture) de

la plage que vous souhaitez sauter.

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

• Utilisez la touche $ ou › pour sauter à d'autres

plages pour lesquels vous n'avez pas posé de ID de saut. Si

vous appuyez sur SKIP ID SET , il portera sur la plage en

cours de lecture.

• S'il n'y a plus d'espace sur le disque pour enregistrer un autre

ID de saut, l'affichage indiquera le message SKIP FULL.

2 Pressez à nouveau SKIP ID SET pour

confirmer.

RDM PGM RPT-1

CD-RW

‡

D.VOL

SYNC DIGITAL FINALIZE

SKIP ON A.TRACK FADER

Après l’affichage de SET, l’enregistreur revient à l’affichage

de lecture ordinaire.

L'indicateur d'SKIP de saut s'allume sur l'affichage une

fois un ID de saut posé.

Pour annuler, appuyez sur SKIP ID CLEAR ou #.

3 Posez d’autres codes de saut en

répétant les étapes 1 et 2.

SKIP ID

SET CLEAR

$›

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer PDRL77 Manual

Product: