17999
48
Zoom out
Zoom in
Previous page
1/64
Next page
48
5 More Recording Features
5 Fonctions d’enregistrements complémentaires
En/Fr
Checking What's at the End
of a Disc
Note: This feature is only available when this unit
is not connected to the XC–L77 receiver.
You don't have to record a whole disc at once. Until you finalize the
disc, further recording is possible from the end of the last track you
recorded (assuming there are fewer than 99 tracks already on the
disc). Here's how to check what's on the last recorded section of the
disc before recording new material:
1 Press REC.
The recorder goes into record-pause mode.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
2 Press and hold !.
You'll hear the last recorded track in reverse. Release the
button and the track plays normally to the end.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
While the track is playing you can use the ! and
buttons.
If you press REC again while the track's playing, the
recorder jumps to the end of the track and goes into record-
pause mode again.
When the track has played out, the recorder automatically
enters record-pause mode again.
3 Once the player is back in record-
pause mode you can go ahead and
record normally.
If you decide you don’t want to record, just press &.
&
REC
!
⁄
Contrôle de la fin du disque
Remarque: Cette caractéristique est disponible
seulement quand cet appareil est raccordé au
récepteur XC-L77.
Il n’est pas nécessaire d’enregistrer tout un disque en une fois.
Jusqu’à la finalisation du disque, d’autres enregistrements sont
possibles à partir de la fin de la dernière plage enregistrée (en
supposant qu’il y ait moins de 99 plages sur le disque). Voici
comment contrôler ce qu’il y a dans la dernière section enregistrée
avant d’enregistrer de nouveaux matériaux.
1 Appuyez sur REC.
L’enregistreur passe en mode pause d’enregistrement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
2 Maintenez ! enfoncé.
Vous entendrez la dernière plage enregistrée en lecture
inverse. Relâchez la touche et la plage sera lue
normalement jusqu’à sa fin.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Pendant la lecture de la plage, vous pouvez utiliser les
touches ! et (recul/avance rapide).
Si vous pressez à nouveau REC pendant la lecture de la
plage, l’enregistreur sautera à la fin de la plage et repassera
en mode pause d’enregistrement.
La lecture de la plage terminée, l’enregistreur passera
automatiquement en mode pause d’enregistrement.
3 Une fois l’enregistrement revenu en
mode pause d’enregistrement, vous
pouvez enregistrer normalement.
Pressez simplement & si vous décidez de ne rien enregistrer.
&
REC
!
⁄
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDRL77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info