Manual Pioneer AVIC-F9880DAB (page 63 of 87) (English)

649253

Zoom out

Zoom in

1/87

Displaying the “Audio” setting

screen

1 Press the button.

2 Touch , and then .

Using fader/balance adjustment

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Fader/Balance].

p Only the balance can be adjusted when “On” is selected in

“Rear Speaker”. Touch [Balance] and skip to step 4.



Refer to Setting the rear speaker output on page 63.

3 Touch or to adjust the front/rear speaker

balance.

p Set “Front” and “Rear” to “0” when using a dual speaker

system.

4 Touch or to adjust the left/right speaker

balance.



You can also set the value by dragging the point

on the displayed table.

Switching sound muting/

attenuation

You can automatically mute or attenuate the AV source volume

and the iPhone or smartphone application volume when the

navigation outputs the guidance voice.

The default setting is “ATT”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Mute Level].

3 Touch the item.

 ATT:

The volume becomes 20 dB lower than the current volume.



Mute:

The volume becomes 0.



Off:

The volume does not change.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of

each source to prevent radical changes in volume when switch-

ing between sources.

Settings are based on the FM tuner volume level, which

remains unchanged.

This function is not available when the FM tuner is selected

as the AV source.

1 Compare the FM tuner volume level with the

level of the source.

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

3 Touch [Source Level Adjuster].

4 Touch or to adjust the source volume.

p If you directly touch the area where the cursor can be moved,

the SLA setting will be changed to the value of the touched

point.

“+4” to “–4” is displayed as the source volume is increased

or decreased.

The default setting is “0”.

Setting the rear speaker output

A rear speaker output of this product can be turned on or off.

The default setting is “On”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Rear Speaker] to switch “On” or “Off”.

p If “Off” is selected, the rear speaker adjustment is not availa-

ble in “Speaker Level”, “Time Alignment” and “Crossover”.

Setting the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

The default setting is “On”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Subwoofer] to switch “On” or “Off”.

p If “Off” is selected, the rear speaker adjustment is not availa-

ble in “Speaker Level”, “Time Alignment” and “Crossover”.

Adjusting the cutoff frequency

value

You can adjust the cutoff frequency value of each speaker.

The following speakers can be adjusted:

Front, Rear, Subwoofer

“Rear” is available only when “Rear Speaker” is set to “On”.



Refer to Setting the rear speaker output on page 63

“Subwoofer” is available only when “Subwoofer” is set to

“On”.



Refer to Setting the subwoofer output on page 63

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Crossover] or [Subwoofer Settings].

3 Touch [<] or [>] to switch the speaker.

4 Drag the graph line to set the cutoff position.

5 Drag the lowest point of the graph to set the

cutoff slope.

p The following items can also be set.



⁂⁚⁓⁥⁗

Switches the subwoofer phase between normal and reverse

position.



LPF/HPF:

Switches the LPF/HPF setting to “On” or “Off”.

When it is turned off, the high-pass filter or low-pass filter of

each speaker can also be turned on by touching the graph

lines.

Selecting the listening position

You can select a listening position that you want to make as the

centre of sound effects.

The default setting is “Off”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 63

2 Touch [Listening Position].

3 Touch the desired position to change the lis-

tening position.

The following items are available:

Off, Front-L, Front-R, Front, All.

Audio adjustments

< CRB4818-B >

Audio adjustments

Hello, I have read the documentation and I cannot change the langagefrom German to French for vocal navigation. In Parameters, I can change , but without modification on navigation. Ok for radio or screnn. Submitted on 9-3-2019 at 09:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-F9880DAB in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVIC-F9880DAB

Pioneer AVIC-F9880DAB Installation Guide - English, German - 204 pages

Pioneer AVIC-F9880DAB User Manual - German - 95 pages

Pioneer AVIC-F9880DAB Installation Guide - Dutch - 204 pages

Pioneer AVIC-F9880DAB User Manual - Dutch - 91 pages

Pioneer AVIC-F9880DAB Installation Guide - French - 204 pages

Pioneer AVIC-F9880DAB User Manual - French - 93 pages

Pioneer AVIC-F9880DAB Installation Guide - Italian, Spanish - 204 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer AVIC-F9880DAB Manual

Product: