Manual Pioneer AVH-X2800BT (page 39 of 57) (English)

649371

Zoom out

Zoom in

1/57

This function is not available while you make or receive a call

using the hands-free function.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Loudness].

3 Touch the item.

The following items are available:

Off, Low, Mid, High.

Setting the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

The default setting is “On”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Subwoofer] to switch “On” or “Off”.

Adjusting the cutoff frequency

value

You can adjust the cutoff frequency value of each speaker.

The following speakers can be adjusted:

Standard Mode: Front, Rear, Subwoofer.

Network Mode: High, Mid, Subwoofer.

“Subwoofer Settings” is available only when “Subwoofer”

is “On”.



Refer to Setting the subwoofer output on page 39

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Crossover] or [Subwoofer Settings].

3 Touch or to switch the speaker.

4 Drag the graph line to set the cutoff position.

5 Drag the lowest point of the graph to set the

cutoff slope.

p The following items can also be set.



⁂⁚⁓⁥⁗

Switches the subwoofer phase between normal and reverse

position.



LPF/HPF:

Switches the LPF/HPF setting to “On” or “Off”.

When it is turned off, the high-pass filter or low-pass filter of

each speaker can also be turned on by touching the graph

lines.

This function is not available when adjusting the High

speaker.

Switching the rear speaker

output

p This function is available when “Standard Mode” is selected

as the speaker mode.

The default setting is “Rear”.

1 Turn the source off.

 Refer to Selecting a source on page 9

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

3 Touch [Rear Speaker Output].

4 Touch to switch “Rear” or “Subwoofer”.

Using BASS Boost

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Bass Boost].

3 Touch to select the bass boost level from 0 to

+6.

Selecting the listening position

You can select a listening position that you want to make as the

centre of sound effects.

The default setting is “Off”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Listening Position].

3 Touch the desired position to change the lis-

tening position.

The following items are available:

Off, Front-L, Front-R, Front, All.

“All” is not available when “Network Mode” is selected as

the speaker mode.

Adjusting the speaker output

levels nely

Fine adjustments of the speaker output level can be made by

listening to audio output.

This function is available when “Subwoofer” is set to “On”.



Refer to Setting the subwoofer output on page 39

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Speaker Level].

3 Touch or to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

The default setting is “Off”.

“All” is not available when “Network Mode” is selected as

the speaker mode.

If you change the listening position setting, the output

levels of all the speakers will change in conjunction with the

setting.

4 Touch or to adjust the speaker output

level.

p “–24” dB to “10” dB is displayed as the level to be corrected

is increased or decreased.

The following speakers are available:

Standard Mode: Front Left, Front Right, Rear Left, Rear Right,

Subwoofer

Network Mode: High Left, High Right, Mid Left, Mid Right,

Subwoofer

To use this function, the vehicle’s acoustics must be meas-

ured in advance.

Adjusting the time alignment

By adjusting the distance from each speaker to the listening

position, time alignment is able to correct the time required for

sound to reach the listening position.

1 Measure the distance between the head of the

listener and each speaker unit.

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

3 Touch [Time Alignment].

4 Touch or to select the listening position

if necessary.

The following items are available:

< CRB4721-B >

Audio adjustments

radio won’t stop scrolling after install a back up camera what am I supposed to do to stop it Submitted on 28-5-2020 at 23:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVH-X2800BT in the language / languages: English as an attachment in your email.

The manual is 13,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer AVH-X2800BT

Pioneer AVH-X2800BT Installation Guide - English, German - 48 pages

Pioneer AVH-X2800BT User Manual - German - 63 pages

Pioneer AVH-X2800BT Installation Guide - Dutch - 48 pages

Pioneer AVH-X2800BT User Manual - Dutch - 62 pages

Pioneer AVH-X2800BT Installation Guide - French - 48 pages

Pioneer AVH-X2800BT User Manual - French - 61 pages

Pioneer AVH-X2800BT Installation Guide - Italian, Spanish - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer AVH-X2800BT Manual

Product: