677798
18
Zoom out
Zoom in
Previous page
1/103
Next page
DEENESFRITCZSKSIRUJP
SECONDARY AVALANCHE | AUTO-SEARCH-TO-SEND
A secondary avalanche is an avalanche that occurs during a rescue situation. In this case, the
avalanche transceiver of the rescuer is switching immediately to SEND mode, if the device is
in SEARCH mode.
Slide the main switch of the PIEPS DSP PRO/DSP SPORT from SEARCH to SEND without
pressing the lock button. The main switch is engaged in SEND mode. Store the device and hold

The function Auto-Search-to-Send switches the PIEPS DSP PRO/DSP SPORT automatically from
SEARCH- into SEND-mode. The switching of the PIEPS DSP PRO is based on non-movement
and time, at the PIEPS DSP SPORT only on time.
 The activation of the function „Auto-Search-to-Send“ is
carried out by all PIEPS competence partners (PIEPS Service Center). Find more information at
www.pieps.com.
PIEPS advises that the function Auto-Search-to-Send does not help, when the rescuer has
lost his/her beacon in the case of a secondary avalanche. Only if a rescuer wears an active
transmitter, the rescuer is properly equipped in the case of a secondary avalanche.
PIEPS BACKUP: PIEPS recommends to deactivate the Auto-
        

The PIEPS BACKUP is a mini emergency-transmitter (frequency 457
kHz) that is worn in addition to a beacon directly on the body and only
starts to transmit in case of an emergency. So PIEPS provides the rst
100% solution for being located in the case of a possible secondary
avalanche!
The PIEPS BACKUP can be received with every standard beacon!
Active search operations are never inuenced!
ADDITIONAL FUNCTIONS FOR PIEPS DSP PRO
The following additional functions are only valid for PIEPS DSP PRO.
The functions cannot be used or added to the PIEPS DSP SPORT.
1. SCAN-FUNCTION
Press the SCAN button while in the SEARCH-mode. The PIEPS DSP PRO will begin scanning
the entire receiving range. During the scan, stand still and hold the device steady. This will give

groups:
Reading 1: Number of beacons within a distance of approx. 5 m
Reading 2: Number of beacons within a distance of approx. 20 m
Reading 3: Number of beacons within a distance of approx. 50 m
IMPORTANT! Once you have
located all burials, move away from
their locations in a star shape and
use the SCAN function to check the
scenario again. That way you can
make sure you haven’t missed any
other burials.
All information from previously
suppressed (MARKED) signals
will be reset and you can start the
suppression again (MARK) or follow
the direction indication to the next
strongest signal.
Press the button SCAN again to stop
the SCAN function.
1
One beacon within 5 m
2 One further beacon between 5 and 20 m
3 Two or more further beacons between 20 and 50 m
5 m
20 m
50 m
06/15 ||
06/15 3534
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pieps DSP Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pieps DSP Pro in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info