Manual Philips VR1100 (page 19 of 39) (English)

462271

Zoom out

Zoom in

1/39

— 20 —

Clock Setting

You can also reset or correct the clock

manually.

1Select Clock Set Screen

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “INITIAL

SET UP” then press OK/STATUS.

The Initial Set Up menu appears.

4 Press 5 or ∞ to select “SET

CLOCK” then press OK/STATUS.

The clock Set screen appears.

2Set Clock

1 Press 5 or ∞ to set the time, then

press OK/STATUS.

• Each time you press 5 or ∞, the set

time changes by 1-minute intervals.

If you hold the button, the set time

changes by 30-minute intervals.

2 Press 5 or ∞ to set the date, then

press OK/STATUS.

• Each time you press 5 or ∞, the set

date changes by 1-day intervals. If

you hold the button, the set date

changes by 15-day intervals.

3 Press 5 or ∞ to set the year, then

press OK/STATUS.

• Each time you press 5 or ∞, the

set year changes by 1-year

intervals. If you hold the button,

the set year changes rapidly.

4 Except for MAGYARORSZAG (36),

CESKA REPUBLIKA (42),

POLSKA (48) or OTHER EASTERN

EUROPE (EE) country. Press

5 or ∞ to set the JUST CLOCK

function, then press OK/STATUS.

ON: To get accurate time keeping

through automatic adjustments at

regular intervals, by reading data

from PDC signal.

OFF:If the clock setting data from PDC

signal is incorrrect, set to “OFF”.

However, setting to “OFF” reduces

the accuracy of the built-in clock,

which could adversely affect timer

recording.

If you set to “ON”, press 5 or ∞ to set

the channel position to the station that

transmits the clock setting data, then

press OK/STATUS.

ETTING

(CONTINUED)

TIME -- : --

MODE SET

DATE 01/01/00

JUST CLOCK OFF

CHANNEL 1

SET : 5∞ NEXT : OK

END : MENU

3Finish Setting

Press MENU to exit. The clock starts to

operate.

Notes:

• Just Clock (when set to “ON”) adjusts the

VCR’s built-in clock every hour, except for

23:00, 0:00, 1:00 and 2:00.

• Just Clock is not effective when . . .

– the VCR’s power is “ON”.

– the VCR is in the Timer mode.

– a difference of more than 3 minutes

exists between the built-in clock’s time

and the actual time.

– the VCR is in the Auto Satellite Prog

Rec mode (✈P.28).

– the VCR is in the Power Save mode

(✈P.16).

• If Just Clock is set to “ON”, the VCR’s

clock is automatically adjusted at the

start/end of Summer Time.

• Just Clock may not function properly

depending on the reception condition.

• If a power failure occurs, the clock will

lose its setting.

SHOWVIEW

Set Up

To ensure that SHOWVIEW Timer

Recording operates correctly, it is

necessary to set the “Guide Channel

(GUIDE CH)” number for each station.

“Guide Channel (GUIDE CH)

number” refers to the assigned TV

station numbers, according to

broadcast area, for S

HOWVIEW timer

recording. The Guide Programme

numbers can be found in most TV

listings.

IMPORTANT

Normally, Auto Set Up (✈P. 12), Preset

Download (✈P. 14) or Auto Channel Set

(✈P. 17) sets the Guide Channel Numbers

automatically. You need to set the Guide

Channel Numbers manually only in the

following cases.

a) When timer-programming with the

SHOWVIEW system, the channel position,

where the station you wish to record is

received on your VCR, is not selected or

when you add a channel after Auto Set

Up, Preset Download or Auto Channel

Set has taken place. In this case, set the

Guide Channel Number for that station

manually.

b) When you delete a channel or change

channel positions manually after Auto

Set Up, Preset Download or Auto

Channel Set has taken place. In this case,

set the Guide Channel Numbers for all

the receivable stations manually.

c) When you wish to timer-record a satellite

programme with the SHOWVIEW

System. In this case, set the Guide

Channel Numbers for all satellite

broadcasts received on your satellite

tuner.

1Select Initial Set Screen

1 Press MENU.

2 Press 5 or ∞ to select “INITIAL

SET UP” then press OK/STATUS.

2Set Guide Channel Number

1 Press 5 or

∞ to

select

“GUIDE

CHAN-

NEL SET

UP” then

press OK/

STATUS.

2 Press 5 or ∞ or Number buttons to

enter the guide channel number

(GUIDE CH) then press

OK/STATUS.

3 Press 5 or ∞ or Number buttons to

enter the number of the VCR’s

channel position (TV PROG) on

which the Guide Channel number’s

broadcast is received, then press

OK/STATUS.

4 Repeat the above procedures until

you set the guide channel number for

all the receivable stations.

• If the satellite broadcast is received

on your VCR’s auxiliary channel

“L-2”, select “A/V2 REAR” for the

channel position.

3Finish Setting

Press MENU.

VCR SET UP

AUTO TUNER SET UP

MANUAL TUNER SET UP

OUTPUT/INPUT SETUPAL E

\ INITIAL SET UP

SELECT : 5∞ CONFIRM : OK

END : MENU

GUIDE CHANNEL SET UP

GUIDE CH TV PROG

255 --

01 01

03 03

04 04

SELECT: 5

∞

OR 0-9

CONFIRM : OK

END : MENU

GUIDE CHANNEL SET UP

GUIDE CH TV PROG

254 --

255 --

02 02

03 03

SELECT:

∞

OR 0-9

CONFIRM : OK

END : MENU

Untitled-2 16/08/2000, 15:3820

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips VR1100 Manual

Product: