462271
17
Zoom out
Zoom in
Previous page
1/39
Next page
18
If you want to delete
unwanted channels
You can delete channels manually.
1 Press VCR.
2 Press MENU.
3 Press 5 or to select MANUAL
TUNER SET UP then press
OK/STATUS.
The programmed channel
information list appears.
4 Press 5 or until the item you want
to delete begins blinking.
5 Press CLEAR to delete.
The item directly beneath the
cancelled one moves up one line.
6 Press MENU to exit from the menu
operations.
If you want to change the
channel positions
You can also replace the channel
position numbers.
1 Press VCR.
2 Press MENU.
3 Press 5 or to select MANUAL
TUNER SET UP then press
OK/STATUS.
4 Press 5 or until the item you want
to change begins blinking, then press
OK/STATUS.
5 Press 5 or to move the station to
the new channel position then press
OK/STATUS.
Example: If you moved the station in
position 4 to position 2, the stations
originally in positions 2 and 3 each
move down one space.
6 Press MENU to exit from the menu
operations.
If you want to descramble
programmes when receiving
scrambled broadcasts
When you can receive a scrambled
broadcast, you can descramble the
programme by connecting this VCR to
an external decoder through the VCRs
AV2 (L-2) IN/DECODER connector .
Complete the connection described on
page 36 and follow the instructions
below;
1 Press VCR.
2 Press MENU to access the main
menu screen.
3 Press 5 or to select OUTPUT/
INPUT SET UP, then press
OK/STATUS.
The output/input set up screen
appears.
S
ETTING
U
P
(CONTINUED)
4 Press 5 or to select A/V2
SELECT.
5 Press 3 to set to DECODER then
press 2 to return to the main menu
screen.
6 Press 5 or to select MANUAL
TUNER SET UP, then press
OK/STATUS.
The programmed channel
information list appears.
7 Press 5 or 23 to select the
channel position broadcasting
scrambled programmes, then press
OK/STATUS twice. The Manual
Channel Set screen appears.
8 Press 3 until OFF (Decoder
setting) begins blinking, and set it to
ON by pressing 5 or .
9 Press OK/STATUS. The
programmed channel information
list appears.
10 Press MENU to exit menu
operations.
If you want to perform fine-
tuning
Fine-tuning is performed automatically
during Auto Channel Set, but you can
also perform fine-tuning manually.
1 Press VCR.
2 Press MENU.
3 Press 5 or to select MANUAL
TUNER SET UP, then press
OK/STATUS.
4 Press 5∞ 23 until the item you
want to tune begins blinking. Press
OK/STATUS twice. The Manual
Channel Set screen appears.
5 Press 3 until +/–” begins blinking,
then press 5 or until the picture is
clearest.
6 Press OK/STATUS. The
programmed channel list appears.
7 Press MENU to exit the menu
operations.
If you want to change station
names
You can also change the station name
manually.
1 Press VCR.
2 Press MENU.
3 Press to select MANUAL TUNER
SET UP, then press OK/STATUS.
4 Press 5∞ 23 until the item you
want begins blinking.
5 Press OK/STATUS twice. The
Manual Channel Set screen appears.
6 If you want to change the station
name to the registered one (P.19),
press 3 until the station name (ID)
begins blinking, then press 5 or
until the new station name (ID)
appears.
If you want to change the station
name to another than the
registered one, press 3 until the
first letter of the station name (ID)
begins blinking, then press 5 or to
cycle through the characters (AZ,
09, ,
*
, +, _ (space) and stop when
the desired character is indicated,
then press 3 to enter. Enter the
remaining characters the same way
(maximum of 4).
If you make a mistake, press 2
until the incorrect character begins
blinking. Then enter the correct
character by pressing 5 or .
7 Press OK/STATUS. The
programmed channel list appears.
8 Press MENU to exit menu
operations.
INFORMATION
If you live in Eastern Europe, TV
SYSTEM setting appears instead of
DECODER setting on the Manual
Channel Set screen. When you can see
the picture but can hear no audio, select
the appropriate TV system (D/K or
B/G). Normally, TV programmes are
broadcasted as follows.
For Eastern Europe : D/K
For Western Europe : B/G
1 Press 3 until the TV system (D/K or
B/G) starts blinking on the Manual
Channel Set screen.
2 Press 5/ to select the appropriate
TV the System (D/K or B/G).
ATTENTION
If the channel positions are changed
or deleted, the Guide Channel
numbers that have been set are reset
or changed. If an attempt is made at
timer programming with the
SHOWVIEW system in this state, the
GUIDE CHANNEL SET UP
screen appears. Input the channel
position on which the broadcast for
the SHOWVIEW number is received.
If the channels are added, set the
Guide Channel number for that
channel (station). ( SHOWVIEW
®
Set Up on page 20)
OUTPUT/INPUT SET
\ A/V1 OUTPUT VIDEO
A/V1 INPUT VIDEO
A/V2 SELECT A/V
A/V2 INPUT VIDEO
SELECT : 5∞ CHANGE : 3
[MENU] : EXIT
Untitled-2 16/08/2000, 15:3718
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info