Manual Philips VR1100 (page 20 of 39) (English)

462271

Zoom out

Zoom in

1/39

— 21 —

ASIC

PERATIONS

1On TV

1 Turn on the TV.

2 Select the video channel (or external

video input).

2On VCR

Insert a cassette.

The VCR turns on automatically and

the counter is reset to 00:00:00.

• If the record tab on a cassette is removed,

playback will start automatically.

• If a cassette is already in the VCR, turn

on the VCR.

3Start Playback

Press PLAY 3. The counter is reset to

00:00:00.

“DSPC” appears blinking in the VCR’s

display panel during automatic

tracking. (✈P.23)

• Playback picture quality of LP recordings

will not be as high as SP recordings.

• Compact VHS camcorder recordings can

be played on this VCR. Simply place the

recorded cassette into a VHS Cassette

Adapter and it can be used just like any

full-sized VHS cassette.

• This VCR can play both VHS and Super

VHS signals using Super VHS cassettes.

Tape Position Indicator

The tape position indicator appears

on screen when, from the Stop mode,

you press 1, ¡ or perform an

Index Search. The position of “5” in

relation to “0” (beginning) or “+”

(end) shows you where you are on

the tape.

“O.S.D.” (P.26) must be set to “ON”,

or the indicator will not appear.

To rapidly locate a particular

scene

Press ¡ or 1 during playback.

(No sound comes out.)

To resume playback, press PLAY 3

again.

• If ¡ or 1 is held down for more than

2 seconds, simply releasing it will cancel

the search.

To stop playback

Press 7 STOP.

To rewind the tape

Press 1 or turn the shuttle ring on the

front panel counterclockwise when the

tape is not running.

To fast forward the tape

Press ¡ or turn the shuttle ring on the

front panel clockwise when the tape is

not running.

To eject the tape

Press STOP/EJECT 7/0 on the front

panel.

To turn off the VCR

Press POWER or STANDBY/ON.

When playing an NTSC tape;

• Some TVs shrink the picture vertically

and place black bars at the top and the

bottom of the TV screen.

• The time counter and remaining tape

length will not be correct.

• The picture may roll up and down. This

can be corrected using the V-HOLD

control found on some TVs. (This cannot

be corrected if the TV does not have a

V-HOLD control).

• During search, still, or frame-by frame

playback, the picture will be distorted,

and there may be a loss of colour.

REMAIN 2:35

1:23:45

Beginning End

Note:

Depending on the type of tape used, there

may be times when the indication is not

correct.

Selecting Colour Mode

Before using the VCR, you need to set

the colour mode both for recording and

playback.

You can play PAL, NTSC and

MESECAM tapes, or record PAL and

SECAM* signals on this VCR. Follow

the procedure below to select the

appropriate colour system.

* SECAM signals will be recorded as

MESECAM on this VCR; MESECAM

is the designation for tapes with

SECAM signals that have been

recorded on a MESECAM-compatible

PAL VCR.

1Select VCR Set Up Screen

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “VCR SET

UP”, then press OK/STATUS.

2Set Colour System Mode

Press 5 or ∞ to select “COLOUR

SYSTEM”, then press 4to select the

appropriate colour system.

Each time you press 4, the setting

changes as follows;

a- PAL/NTSC:

To record PAL signals, or playback a

PAL or NTSC tape.

b- MESECAM:

To record SECAM signals, or play a

MESECAM tape.

3Finish Setting

Press MENU to exit the menu

operation.

Playback

Make sure....

• Your VCR, TV, and antenna are

connected correctly.

• Press VCR to operate the VCR using

remote control.

• The correct colour mode is selected.

(✈P.16)

S-VHS ON

\COLOUR SYSTEM PAL/NTSC

SELECT:

∞

CHANGE : 4

END : MENU

Untitled-2 16/08/2000, 15:3821

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips VR1100 Manual

Product: