521762
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
7 Answering machine
Your fax machine is equipped with a digital telephone answering
machine. All recorded messages are stored in a solid-state
electronic memory which has a recording capacity of about 15
minutes. There is neither a magnetic tape nor a cassette.
Your answering machine is factory-programmed with a recorded
outgoing message. If you want to record your own outgoing
message, proceed as described under Recording a message.
Write down your messages before you record them (max. 20 sec.).
Make sure that your fax machine stands on a flat surface, because
otherwise the microphone may be covered.
Switching on and off
1 Select function 31 and confirm with OK.
2 Confirm the current fax reception mode with OK.
3 Select with </> and press OK again.
Recording a message
1 Hold down RECORD for two seconds. Press RECORD
again, until you hear a confirmation tone. Now start to record your
message.
2 A black bar indicates you how much memory is available for the
outgoing message.
3 Stop recording by pressing RECORD or STOP. If you want to
record only the first outgoing message, press #.
4 If you want to record a closing message, press RECORD and
proceed as described above.
5 By pressing </> you can change the volume of the messages. If
you want to re-record the messages, press RECORD shortly.
Recording time
1 Select function 51 and press OK.
2 Press </> to choose between 30, 60, 120 seconds or the
AUTO mode (unlimited recording time). Please note that
AUTO mode is not available in all countries.
Listening to messages
1 If PLAY/PAUSE flashes, messages have been recorded for
you. Press PLAY/PAUSE to listen to the first message. The
date and time the message was received will be shown on
the display.
2 If you want to interrupt the message, press PLAY/PAUSE. When
you want to continue with the messages, press PLAY/PAUSE
again.
3 Press # to skip to the next message, press * to repeat the
previous message.
Play back volume
1 Press </> while playing back messages. The current volume
setting will be displayed.
2 Press </> to obtain the desired volume.
Deleting messages
Single messages
1 If you want to delete the message which is currently being played,
press CLEAR.
2 You will be asked on the display if you really want to delete this
message. Press CLEAR again.
All messages
1 Press CLEAR after having listened to all messages.
2 If you actually want to delete all messages, press CLEAR again. To
interrupt the deleting process press STOP.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic

Philips Magic User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info