663513
15
Zoom out
Zoom in
Previous page
1/31
Next page
13
English
Switching on the system
1 After completing all the connections, connect the AC
power cord of the DVD system and subwoofer to the
power outlet.
The first time you turn on power,
"AUTO INSTALL - PRESS PLAY" may appear on the
display screen. PressÉÅ on the system to start
installation or press Ç to exit (refer to “Radio Reception -
Plug and Play”).
2 Press SOURCE button (or press TV/AV, DISC, TUNER
or AUX/DI) to select the input source.
The selected source will be displayed.
For viewing a DVD or VCD, a TV needs to be connected
(refer to “Connections - Connecting a TV”).
Switch on the TV and set it to the correct video in channel
(for example, EXT1, EXT2, AV1, AV2). Refer to your TV
instruction manual for details.
The default screen appears on the TV.
You can connect other equipment to the DVD system in
order to use the Home Cinema Audio System’s surround
sound capabilities. For example, connect to a TV and select
TV/AV as the input source or connect to a VCR and select
AUX as the input source.
IMPORTANT!
If your TV screen is only showing a black/white
picture or the picture is completely distorted,
please refer to NTSC/PAL setting or System
Setup (DVD) - TV system.
If you do not get a proper picture or sound,
please refer to System Setup (DVD) in order to
change the pre-settings as necessary to
accommodate your TV system or change to your
preferred settings.
NTSC/PAL setting
Set the DVD system to NTSC or PAL, whichever matches
your TV. The factory default setting is PAL. This setting is
necessary if you connected the DVD system to a
NTSC TV only.
1 Press SOURCE or DISC
to select disc mode.
Make sure that no disc is
inside the disc tray.
2 Hold down DISC on the
remote control until the
current setting (NTSC or
PAL) appear on the display.
3 If you want to change the setting, repeat step 2.
System Setup (DVD)
The system setup is carried out via the TV, enabling you to
customise the DVD system to suit your particular
requirement. If the options selected are not available on a
disc, then the disc’s own preference will be used.
To enter System Setup menu
1 Press SYSTEM MENU then 4 to select icon from
the menu bar on the TV screen.
Playback will stop.
2 Use 34 1 2 to toggle through the functions (
) and select your preferred option.
3 Press OK to confirm a highlighted selection.
4 To remove the menu, press SYSTEM MENU again.
Setting the picture
TV Shape
Black Level shift
Video shift
On
1en
1en
st1
panscan
TV System
Auto
Personal colour
Settings...
Colour settings
1 Personal
ö TV Shape
Select the aspect ratio of the connected TV.
If you have a normal TV and your DVD is
formatted for wide screen viewing,
select 4:3 letter box. Wide picture with black bands will be
displayed on the upper and lower portions of the TV
screen.
If you have a normal TV and your DVD is not
formatted for wide screen viewing,
select 4:3 panscan (default setting). A picture is displayed
on the whole TV screen (or “reformatted to fit your TV”).
If you have a wide screen TV,
select 16:9 (you must also set your wide screen TV to “full
size”).
PREPARATIONS
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips LX8000SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips LX8000SA in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips LX8000SA

Philips LX8000SA User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info