663513
29
Zoom out
Zoom in
Previous page
1/31
Next page
27
English
Clock/Timer
Timer setting
The system can switch on to DISC or TUNER mode
automatically at a preset time, serving as an alarm to wake
you up.
IMPORTANT!
Before setting the timer, ensure that the clock
is set correctly.
The timer will always be switched on after it
has been set.
The volume of the timer will increase gradually
to minimum level 12 or the last tuned volume
level.
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
The clock timer and starts flashing.
2 Press SOURCE repeatedly (or DISC or TUNER on the
remote control) to select the sound source.
DISC XX:XX" indicates the disc mode is selected.
TUNER XX:XX indicates the Tuner mode is selected.
3 Press S or T to set the hours and minutes. To
increase the speed, hold down S or T.
4 Press CLOCKTIMER to store the timer.
The set timer "XX:XX" and the selected source are
displayed.
remains on the display.
At the preset time, the selected sound source will play.
If DISC source is selected, the timer will wake up by
playing the first track of the disc or programmed track. If
the disc tray is empty, it will switch to Tuner mode.
If Tuner source is selected, the timer will wake up by
playing the last tuned radio station.
Note:
During timer setting, if no button is pressed within 90
seconds, the system will exit timer setting mode automatically.
CLOCK/TIMER
Deactivating the timer
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
2 In timer mode, press Ç on the system to cancel the timer.
disappears from the display and "TIMER OFF" is
displayed.
Activating the timer to the last preset
time and source
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
2 Press CLOCKTIMER again to store the timer setting.
The last set timer information is displayed for a few
seconds and is shown.
Sleep timer setting
The sleep timer enables the system to switch to standby
mode automatically at a preset time.
1 Press SLEEP on the remote control repeatedly to select a
preset amount of time after which the system will shut itself
off automatically.
The selections are as follows (time in minutes):
15 30 45 60 90 120 OFF 15
"SLEEP XX" or "SLEEP OFF" is displayed. "XX" is the
time in minutes.
2 When you reach the desired length of time, stop pressing
the SLEEP button.
The sleep timer is now set. Before the system switches
to standby mode, a countdown of 10 seconds is displayed.
"SLEEP 10" "SLEEP 9".... "SLEEP 1"
"SLEEP"
To check the remaining length of time after
sleep timer is activated
Press SLEEP once.
To change the preset sleep timer
Press SLEEP again while the remaining sleep timer is
shown.
The display will show the sleep timer options.
To deactivate the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" is displayed,
or press the STANDBY ON button.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips LX8000SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips LX8000SA in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips LX8000SA

Philips LX8000SA User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info