Positioning the bowl
- Position the bowl as indicated in fig. 2.
- Move the handle in the direction of the arrow
until it stops (fig. 3).
Positioning the cover
- Position the cover as indicated in fig. 4.
- Move the cover firmly in the direction of the
arrow until it stops and the markings on the
cover and on the bowl (handgrip) meet (fig. 5).
Built-in safety lock
Only if correctly
- the cover has been screwed onto the bowl and
also the screw-cap has been screwed onto the
blender jar mounting hole,
- or the blender jar has been screwed onto the
blender jar mounting hole,
the built-in safety lock is released so that the
appliance can be switched on.
After use
- Switch off (fig. 6).
- Remove the bowl
from the appliance
(fig. 7).
- Release the cover
from the bowl (fig. 8).
Food chute and pusher
• Use the pusher to feed
ingredients through the
food chute (fig. 9).
• You can keep the
pusher in the food
chute to serve as a
stopper while
operating. This will
prevent splashing and
making dust.
• The pusher is equipped with a pushing guide.
The pushing guide can be removed from
the pusher (fig. 10).
If removed, the pushing guide and the smaller
filling opening can be useful when processing
e.g. carrots (fig. 11) and if the portion is too
small to fill the food chute.
Please note: use the pushing guide only if
the pusher is in the food chute.
5
