639197
31
Zoom out
Zoom in
Previous page
1/36
Next page
Service 31
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
1 Turn the device off by pressing the B button
twice.
2 Wait at least ten seconds.
3 Turn the device on by pressing the B button
once.
4 If the problem persists, please contact our
technical service centre or your dealer.
Problems Solutions
The projector cannot be turned on Disconnect and connect the power cable and
try to turn it on again.
The projector cannot be turned off Push the B button longer than ten seconds.
If it does not work, disconnect the power
cable.
No sound Check that the speaker is activated (see
Sound settings, page 26).
Adjust the volume using the VOLUME but-
tons (N/O).
No sound from the external connected device Check the cables to the external device.
Check that the sound is activated on the
external device.
Only the original cables from the device man-
ufacturer may function.
No sound from external HDMI output device Set the audio setting to Multichannel (Raw
data) & Stereo (PCM).
No sound when you connect your computer via
HDMI cable
Check that the sound is activated on the
computer.
Video display problem when the source is a 3D
signal from a Blu-ray player
Check that the 3D mode is activated on the
projector
(see 3D settings, page 26).
If the Blu-ray player is connected to the pro-
jector via HDMI, use any of the HDMI sockets.
Only the initial screen appears and not the image
from the external device
Check if the cables are connected to the right
sockets.
Check that the external device is turned on.
Check if the video output of the external
device is turned on.
Check that the HDMI source selected on the
user interface corresponds to HDMI connec
-
tor where the external device is connected.
Only the initial screen appears and not the image
from the connected computer
Check that the VGA-output of the computer
is turned on.
Check if the resolution of the computer is set
to 1920*1080 (for VGA-connection) or 1080P
(for HDMI-connection).
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HDP2510 - Screeneo 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HDP2510 - Screeneo 2.0 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HDP2510 - Screeneo 2.0

Philips HDP2510 - Screeneo 2.0 User Manual - German - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - Dutch - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info