639197
30
Zoom out
Zoom in
Previous page
1/36
Next page
30 Philips · HDP2510
1 Loosen the two screws that secure the lamp.
1 Pull out the lamp by inserting your fingers in
the two slots.
.
2 Gently insert the new lamp.If it doesn’t fit
easily, make sure its facing the correct way.
3 Tighten the two screws that secure the lamp.
4 Replace the lamp cover on the projector.
5 Tighten the two screws that secure the lamp
cover.
6 Plug the power cable to outlet.
Resetting the lamp timer
1 To turn on the projector, press the B button
on the panel control of the device or on the
remote control once.
2 Press the OPTION/Ă button and use ¡/¢
to select System.
3 Confirm with OK.
4 Use ¡/¢ to select Reset lamp timer.
5 Confirm with OK.
6 A message displays asking if you want to
reset the lamp timer. Confirm with OK. The
lamp time will be reset to “0”.
CAUTION!
Do not turn the power on while the
lamp cover is removed.
Do not insert your fingers between
the lamp and the projector.
The sharp edges inside the projec-
tor may cause injuries.
CAUTION!
Pulling it too quickly may cause the
lamp to break and scatter broken
glass in the projector.
Do not place the lamp in locations
where water might splash on it,
children can reach it, or near flam-
mable materials.
Do not insert your hands into the
projector after the lamp is
removed.
If you touch the optical compo-
nents inside, it could cause colour
unevenness and distortion of the
projected images.
CAUTION!
Loose screws may cause a bad
connection, which could result
malfunction.
Do not overtighten the screws.
CAUTION!
Do not reset the lamp timer if the lamp
has not been replaced as this could
cause damage.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HDP2510 - Screeneo 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HDP2510 - Screeneo 2.0 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HDP2510 - Screeneo 2.0

Philips HDP2510 - Screeneo 2.0 User Manual - German - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - Dutch - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info