639197
29
Zoom out
Zoom in
Previous page
1/36
Next page
Service 29
8 Service
Cleaning
Cleaning the lens
Use a brush or lens cleaning paper for cleaning
the lens of the projector.
Replacing the lamp
The UHP lamp will last up to 10,000 hours. It
will mature during its life time, so some loss in
brightness is a normal part of the process and
should be expected. We recommend that the
lamp is replaced between 5,000 and 10,000
hours, depending which lamp mode is used.
You can check the elapsed lamp time from the
Option menu / Information / Equivalent lamp
hour
(see Information, page 27). A replacement
lamp can be ordered from our customer service
centre.
1 Turn off the projector and disconnect the
device from the power outlet.
2 Loosen the two screws that secure the lamp
cover on the side of the projector until the
lamp cover loosens.
3 Remove the lamp cover from the projector.
DANGER!
Instructions for cleaning!
Use a soft, lint-free cloth. Never use liq-
uid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the device. Do not
spray the device with any cleaning flu
-
ids.
Wipe over the surfaces gently. Be care-
ful that you do not scratch the surfaces.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning agents
for cleaning the lens, to avoid damaging
the coating film on the lens.
CAUTION!
Do not operate the lamp beyond the
rated lamp life. Excessive operation of
lamps could cause a lamp to break on
rare occasions.
DANGER!
Instructions for cleaning!
To reduce the risk of electrical
shock, always turn the projector off
and disconnect the power cable
before changing the lamp.
To reduce the risk of severe burns,
allow the projector to cool for at
least 45 minutes before replacing
the lamp.
To reduce the risk of injuries to fin-
gers and damage to internal com-
ponents, use caution when remov-
ing lamp glass that has shattered
into sharp pieces.
To reduce the risk of injuries to fin-
gers and/or compromising image
quality by touching the lens, do not
touch the empty lamp compart-
ment when the lamp is removed.
This lamp contains mercury. Con-
sult your local hazardous waste
regulations to dispose of this lamp
in a proper manner.
Notice
The lamp becomes extremely hot dur-
ing operation. Allow the device to cool
for approximately 45 minutes prior to
removing the lamp.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HDP2510 - Screeneo 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HDP2510 - Screeneo 2.0 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HDP2510 - Screeneo 2.0

Philips HDP2510 - Screeneo 2.0 User Manual - German - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - Dutch - 36 pages

Philips HDP2510 - Screeneo 2.0 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info