Manual Philips FT565 (page 6 of 44) (English, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

799038

Zoom out

Zoom in

1/44

• Press button ® 'DOWN' or @ 'UP' repeatedly

and briefly. This changes the tuning frequency step

by step until the correct value is reached. If it is a

stereo transmission indicator @ 'STEREO' lights

up.

Note:

With powerful transmitters the 'TUNED'

indicator lights up. This does not happen wIth

relatlvely weal< transmitters. In these cases press

button d) or @ briefiy again, until reception is

optimum.

If you pass the required frequency

Go back step by step to the desired frequency by

briefly and repeatedly pressing the ether button

@or

(8).

• Depress, if desired, key @ 'FM-NR' to reduce

posslble noise.

• During tuning the audio signals are completely

suppressed to prevent any interference trom

parasitic nolse.

• If you are tuning to weak FM transmitters, press

button @ 'FM AUTO STEREO' once; indicator ®

'FM auto stereo' goes out. The tuner then only piays

back in mono and the audio signal is not suppres-

sed during tuning; this prevents these transmitters

from being suppressed.

C. Tuning to pre-selected transmitters

Pre-selected transmitters can only be tuned If they

have been programmed beforehand in the memory.

Programming transmitters

• Tune either automatically or manually to the

transmitter to be programmed.

• Press button @ 'MEMORY'. Indicator

'MEMORY' lights up on display @.

• Then while Indicator 'MEMORY' is llt up (5 se-

conds),

quickly press the required pre-selected

location @ 'PRESET STATION'. To programme one

of the locations 1 to 8, press the required button

briefiy (less than 0.5 second). (FM, LW or MW

transmitters).

To programme one of the locations 9 to 16 press

the required button (jonger than 0.5 second). (FM

transmitters only). WhIle programming, pay at-

tentlon to display 0.

Wofe;Two FM, 1 medium or 1 long wave transmitter

can be programmed by button 0. By the use of FM

transmitters, mono and stereo can be program-

med.

• The tuner has a standby functlon which prevents

the loss of Information stored In the memory tor a

period of 7 days In the event of a power cut. If the

Interruption lasts for longer than 7 days, the trans-

mitters must be reprogrammed.

Calling up stored transmitters

• Select the required tuning range with selector

button @ 'LW', @ 'MW' or @ 'FM'.

• Press the required pre-seiected location 0

'PRESET STATION'.

With FM press briefly for the pre-selected locations

1 to 8 and slightly longer for the pre-selected

locations 9 to 16. With LW and MW the length of

time the button is pressed has no influence. Pay

attentlon to display 0.

• Depress, If desired, key @ 'FM-NR' to reduce

posslble nolse.

• It is posslble to change from this pre-selected

tuning to manual or automatic tuning without further

actlon.

• A pre-selected transmitter can only be retrieved

from the memory by programming another In place

of It.

GENERAL INFORMATION

Signal suppression (mute)

The audio signal disappears (mute) during varlous

operations. The purpose of this is to suppress any

Interference from parasitic noise. It occurs for

example during automatic tuning (tuning cracklel),

when operating buttons 0 'DOWN' and 0 'UP'.

FM stereo playback

Powerful FM stereo signals are reproduced nolse-

free by the tuner. Indicator @ 'STEREO' then lights

up.

With weaker signals the nolse level quickly In-

creases. This noise can be reduced by depressing

key @ 'FM-NR' but from a certain limit It Is

recommended to switch over to mono playback.

First switch off nolse reduction key @ 'FM-NR' and

depress key @ 'FM AUTO STEREO' once. Indicator

0 'FM auto stereo' then goes out.

Service

The outside of the tuner can be cleaned with a damp

fiuff-free cloth. Use only water to dampen the cloth.

TECHNICAL DATA

(subject

to modification)

FM section

• Wave range:

87,5-108

MHz

• Sensltlvity at 75 ohm:

mono, 26 dB S/N: 1.3 nV at 75 kHz devlatlon

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FT565 in the language / languages: English, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FT565 Manual

Product: