Manual Philips FT565 (page 4 of 44) (English, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

799038

Zoom out

Zoom in

1/44

for powerful local FM transmitters, is directional

and

sliould be

fitted

Inorizontally to

tiie

wall. zyxwvutsrqponmlkjihgfedcbaZYXWVUTSRQPONMLKJIHGFEDCBA

Note: In order to make

full

use of the tuning

facilities

of this tuner, connection to an external

aerial

or cable network is recommended.

(5) connection

screws

for the AM external aerial

and

earth, or AM frame aerial (Ê).

areas

where the frame aerial would give

unsatisfactory

results, connection of the tuner

to an

outdoor

aerial is recommended. Use the

connection screw marked 'AM' for this.

earth lead can be connected to the connec-

tion

screw marked 'G' to prevent any interfer-

ence.

(5) signal

output

sockets

For

plugging the connection cable

into

the

amplifier.

AM frame aerial

For

the reception of medium and long wave

transmitters (MW and LW transmitters). Attach

the frame aerial to the back of the tuner. The

wires

of the frame aerial must be connected to

connection

screws

©.

The

aerial is directional and must be positioned

for optimum reception.

Keep

it at some distance

from large metal objects and live wires.

For

connection of the RC-5 remote control

system.

lead.

CONTROLS

AND THEIR

FUNC-

TIONS

'ON/OFF'

switch

Note:

This

switch is only a secondary switch

and

connects the power supply. It is used to

ensure

that the information in the memory of the

pre-selected

transmitters is not lost.

'SCAN

LEVEL'

indicator

This

lights up if

button

'SCAN

LEVEL'

pressed.

'FM-NR'

indicator

This

lights up if

button

'FM-NR'

pressed.

This

lights up if

button

@ 'FM

AUTO

STEREO'

not

pressed.

The

display gives information about the tuning,

such

as:

'FM',

'MW' and 'LW' tuning range, frequency in

'kHz'

or 'MHz', memory location numbers 'PI'

to 'P16' and the indications

'MEMORY',

•STEREO'

and

'TUNED'.

It indicates the signal strength of the received

transmitter.

Tuning

is optimal when as many segments as

possible

light

up.

This

indicator should

especial-

ly be observed in

case

the transmitter frequen-

is unknown or when tuning indicator© offers

insufficiënt help (very weak transmitters or LW

reception).

'PRESET

STATION'

buttons for pre-selected

transmitters

For

calling up or programming pre-selected

transmitters.

If the

button

is pressed for a short time

(less

than 0.5

sec),

then the FM pre-selected transmit-

ters

1 to 8 can be

used.

If the

button

is pressed

for longer (more than 0,5 sec), then the FM

pre-selected

transmitters 9 to 16 can be

used.

The

length of time the

button

is pressed has no

influence when calling up or programming MW

and

LW transmitters.

button

For

reducing tuning frequency.

button

For

increasing tuning frequency.

'SCAN

LEVEL'

key (tuning sensitivity)

Key

light

up and tuning takes place at normal tuning

sensitivity.

Key

scan

level is lowered resulting in higher tuning

sensitivity.

This

position thus facilitates tuning in

of relatively weak stations during scanning op-

eration.

'FM-NR'

Normally this key may not be depressed.

Only depress this key if upon reception of weak

stereo transmitters annoying noise is audi-

ble.

In spite of the reduction of the noise the

stereo

effect during playback is

preserved.

The

tact that this key is depressed is made visible by

lighting

up of indicator @.

AUTO

STEREO'

button

Button not

pressed:

tuner plays back in stereo (if it is a stereo

broadcast).

tuner plays back in mono, the FM muting is

switched

off, making it possible to tune to weak

transmitters. The tuner no longer stops

automatically when tuning (see 'Manual tu-

ning').

'TUNED'

indicator

This

lights up as soon as a sufficiently powerful

transmitter has been tuned in accurately. The

indicator may fail to

light

up with weaker

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FT565 in the language / languages: English, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FT565 Manual

Product: