43826
9
Zoom out
Zoom in
Previous page
1/72
Next page
Using your robot
Starting and stopping
1 Press the on/off button (Fig. 22).
- You can press the on/off button on the robot.
- You can also press the on/off button on the remote control (FC8710) (Fig. 23).
Tip: If you press the on/off button on the docking station while the robot is charging, the robot starts
cleaning as soon as the rechargeable battery is full (Fig. 24).
2 The on/off indicator starts ashing slowly and the robot starts cleaning (Fig. 25).
3 The robot cleans in auto-cleaning mode until its battery runs low. In auto cleaning mode.
It follows repeated sequences of Z-pattern, random, wall-following and spiral
movements (Fig. 26).
Note: To select an individual mode, press one of the mode buttons on the remote control (FC8710).
See section ‘Cleaning mode selection’ for more details.
4 When the battery runs low, the on/off indicator starts ashing quickly and the robot returns
to the docking station to charge (Fig. 19).
5 You can also press the on/off button to interrupt or stop the cleaning run. If you press the
on/off button again and there is still enough energy in the rechargeable battery,
the robot continues cleaning in the auto cleaning mode.
6 To make the robot return to the docking station before the rechargeable battery runs low,
press the docking button on the remote control (FC8710). (Fig. 27)
- The on/off indicator lights up and the robot returns to the docking station (Fig. 28).
Note: If you did not start the robot from the docking station, it does not return to the docking station
automatically when the rechargeable battery runs low. If there is still enough energy in the rechargeable
battery, you can press the docking button on the remote control to make the robot return to the docking
station. If the rechargeable battery is completely empty, you have to place the robot on the docking
station manually.
Cleaning mode selection (FC8710)
Next to the auto cleaning mode, this robot has four individual cleaning modes that can each be
activated by pressing the appropriate button on the remote control.
Z-pattern mode
- In Z-pattern mode, the robot cleans by making Z-shaped loops through the room to clean large
areas (Fig. 29)
Random mode
- In this mode, the robot cleans the room in a mixed pattern of straight and crisscross
movements. (Fig. 30)
Wall-following mode
- In this mode, the robot follows the walls of the room to give the area alongside the walls an
extra clean (Fig. 31).
Spiral mode
- In this mode, the robot makes a spiral movement with the fan at turbo speed to clean
a dirty area thoroughly (Fig. 32).
Manual driving (FC8710)
1 Use the arrow buttons above and below and to the left and right of the on/off button on the
remote control to navigate the robot through the room (Fig. 33).
ENGLISH 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC8710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8710 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips FC8710

Philips FC8710 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info