Manual Philips FC8710 (page 7 of 72) (English, German, Dutch, French, Italian, Portuguese, Spanish)

43826

Zoom out

Zoom in

1/72

How your robot cleans

Cleaning system

The robot has a 2-stage cleaning system to clean your oors efciently.

- The two side brushes help the robot clean in corners and along walls. They also help to remove

dirt loose from the oor and move it towards the suction opening (Fig. 4).

- The suction power of the robot picks up loose dirt and transports it through the suction

opening into the dust container (Fig. 5).

Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of cleaning patterns to clean each

area of the room optimally. The cleaning patterns it uses are:

1 Z-pattern or zigzag pattern

2 Random pattern

3 Wall-following pattern

4 Spiral pattern

During auto cleaning, the robot uses these patterns in a xed sequence:

1 Z-pattern (Fig. 6)

2 Random pattern (Fig. 7)

3 Wall-following pattern (Fig. 8)

4 Spiral pattern (Fig. 9)

When the robot has completed this sequence of patterns, it starts moving in Z-pattern again.

The robot continues to use this sequence of patterns to clean the room until the rechargeable

battery is empty, or until it is switched off manually.

Note: You can also select each mode individually by pressing the appropriate button on the remote

control (FC8710). For more details, see chapter ‘Using your robot’, section ‘Cleaning modes’.

How your robot avoids height differences

- The robot has three drop-off sensors in its bottom. It uses these drop-off sensors to detect and

avoid height differences such as staircases (Fig. 10).

Note: It is normal for the robot to move slightly over the edge of a height difference, as its front drop-off

sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase or other height

difference in time. Therefore monitor the robot carefully the rst few times you use it,

and when you operate it near a staircase or another height difference.

Before rst use

Mounting the side brushes

1 Unpack the side brushes and place the robot upside down on a table or on the oor.

2 Push the side brushes onto the shafts on the bottom of the robot (Fig. 11).

Note: Make sure you attach the side brushes properly. Press them onto the shaft until you hear them

lock into position with a click.

Removing the protection tag from the remote control

The remote control (FC8710) works on a CR2025 coin-shaped battery. This battery is protected

with a protection tag that has to be removed before use.

1 Pull the battery protection tag out of the battery compartment of the remote

control (Fig. 12).

, Now the remote control is ready for use.

ENGLISH 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8710 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips FC8710

Philips FC8710 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FC8710 Manual

Product: